FS: 2008 Nismo 350Z
05-18-2013, 05:38 PM
#1
Registered User
Thread Starter
iTrader: (2)
Join Date: Dec 2007
Location: Stockton, Ca
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
2008 Nismo 350Z
2008 Nismo 350Z #0756 - Roughly 46,000 Miles, Vin# JN1BZ34E08M750642
25k OBO Please
The car sits in my garage so I think its time for a owner who would appreciate it more than I can. It has never been waxed or detailed and the paint is still very good. It does need some TLC in that department. I work 12-16 hour days, 6-7 days a week and I ride a bicycle to work just to give you an idea on how much this car sits in my garage. The battery has just been replaced by my local Nissan in about Dec-Jan (I have receipt somewhere). Car has never been raced, tracked or abused.
I am the original owner. Bought it off the lot with 5 miles on the odometer. Pink slip in hand, clean title, adult owned and driven. Non-smoker
Front Bumper was replaced with a OEM V3 Bumper. I purchased a "Authentic Nismo 380RS" bumper from a member here **cough cough, no names, cough Flo-ridaZ33, cough** But instead was shipped a OEM US Spec and over-paid
Anywho... 
Also some Dope Fiend swiped my Driver Rear Wheel and it has some scuffs. Took it to a local shop and they quoted me $140 to fix it. The rear fender well also had a touch up paint job because of this. (I have pictures of the minor damage if needed)
PLEASE NOTE TE37 WILL NOT COME WITH THE CAR. OEM RAYS WILL
Please PM me if interested or want other pictures/documentation. All service has been done at Stockton Nissan and I have most of the receipts, if not I'm sure they can print out the record of services for me. Certificate of Authenticity also available that came with these cars as well as original window sticker. ALL OTHER OEM PARTS come with the car as well.
#JN1BZ34E08M750642
Thanks for looking - Luis
Engine:
----------------------------------------
- Berk Test Pipes (less than 100 miles)
- Injen Dual Intakes (less than 100 miles)
Brakes, and Suspension:
----------------------------------------
- STANCE GR+ Pro Coilovers (roughly 20k miles)
- Z1 Motorsports Drilled and Slotted Brake Rotors (less than 100 miles, not pictured)
- Hawk Performance Brake pads (less than 100 miles)
*SS Braided brake lines also included that have not been installed*
- Project Kics r40 Neo Chrome lug nuts
- ARP Extended Wheel Studs (Not pictured)
Interior, Exterior, Audio:
----------------------------------------
-OEM Nissan Navi Pod with Kenwood Touchscreen
and Kenwood Receiver for iPod, Mp3, Video, Navigation installed.
- S2000 Antenna
- Rear Wiper Delete
- Nismo 380RS Gas Pedal
- Nismo Door Kick Plates
- Z Speed Performance Undershroud (Powdercoated Black)
- Carbon Fiber overlay to Interior Door handles
(you know, the ones that get all messed up and scratched)
ImageShack.us
ImageShack.us
Uploaded with ImageShack.us
25k OBO Please
The car sits in my garage so I think its time for a owner who would appreciate it more than I can. It has never been waxed or detailed and the paint is still very good. It does need some TLC in that department. I work 12-16 hour days, 6-7 days a week and I ride a bicycle to work just to give you an idea on how much this car sits in my garage. The battery has just been replaced by my local Nissan in about Dec-Jan (I have receipt somewhere). Car has never been raced, tracked or abused.
I am the original owner. Bought it off the lot with 5 miles on the odometer. Pink slip in hand, clean title, adult owned and driven. Non-smoker
Front Bumper was replaced with a OEM V3 Bumper. I purchased a "Authentic Nismo 380RS" bumper from a member here **cough cough, no names, cough Flo-ridaZ33, cough** But instead was shipped a OEM US Spec and over-paid
Anywho... Also some Dope Fiend swiped my Driver Rear Wheel and it has some scuffs. Took it to a local shop and they quoted me $140 to fix it. The rear fender well also had a touch up paint job because of this. (I have pictures of the minor damage if needed)
PLEASE NOTE TE37 WILL NOT COME WITH THE CAR. OEM RAYS WILL
Please PM me if interested or want other pictures/documentation. All service has been done at Stockton Nissan and I have most of the receipts, if not I'm sure they can print out the record of services for me. Certificate of Authenticity also available that came with these cars as well as original window sticker. ALL OTHER OEM PARTS come with the car as well.
#JN1BZ34E08M750642
Thanks for looking - Luis
Engine:
----------------------------------------
- Berk Test Pipes (less than 100 miles)
- Injen Dual Intakes (less than 100 miles)
Brakes, and Suspension:
----------------------------------------
- STANCE GR+ Pro Coilovers (roughly 20k miles)
- Z1 Motorsports Drilled and Slotted Brake Rotors (less than 100 miles, not pictured)
- Hawk Performance Brake pads (less than 100 miles)
*SS Braided brake lines also included that have not been installed*
- Project Kics r40 Neo Chrome lug nuts
- ARP Extended Wheel Studs (Not pictured)
Interior, Exterior, Audio:
----------------------------------------
-OEM Nissan Navi Pod with Kenwood Touchscreen
and Kenwood Receiver for iPod, Mp3, Video, Navigation installed.
- S2000 Antenna
- Rear Wiper Delete
- Nismo 380RS Gas Pedal
- Nismo Door Kick Plates
- Z Speed Performance Undershroud (Powdercoated Black)
- Carbon Fiber overlay to Interior Door handles
(you know, the ones that get all messed up and scratched)
ImageShack.us
ImageShack.us
Uploaded with ImageShack.us
Last edited by RastabeanZ; 05-19-2013 at 05:30 PM. Reason: Provide Vin#
Trending Topics
Gotta represent the Konohagakure
05-31-2013, 10:07 PM
#9
NOOOO, keep her!!!!
I saw you have the NAVI pod, happen to have the part number and which kenwood touchscreen you used? I may have the same touchscreen and was gonna pass on the NAVI pod since it seemed there was fitment/gap issues.
GL with sale tho!
I saw you have the NAVI pod, happen to have the part number and which kenwood touchscreen you used? I may have the same touchscreen and was gonna pass on the NAVI pod since it seemed there was fitment/gap issues.
GL with sale tho!
05-31-2013, 11:57 PM
#10
Registered User
Thread Starter
iTrader: (2)
Join Date: Dec 2007
Location: Stockton, Ca
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
- Kenwood KOS-L702 6.95" Monitor
- Kenwood KNA-G510 Hideaway Navigation Unit (Not Yet Installed)
- Scosche Wire Harness (Part # NN03B)
- Scosche Reverse Wire Harness (Part # NN03RB)
- 06+ OEM Center Bezel for Navigation - From Concept Z Performance (Part # NIS350-68260-CF)
- 06+ Navigation Switch Assembly - From Courtesy Nissan (Part # 28395-CF405)
- 06+ Navigation Finisher - From Local Nissan Dealership (Part # 68499-CF40A)
There were no fitment problems for me. Screen fits like a gem and I suggest using the OEM center bezel for the clean OEM look.
Also the Navigation switch assembly is just for looks. The screen is all touch screen
06-01-2013, 04:03 AM
#11
WOW, thank you!! I have exact screen and navi unit, was trying to be ingenious with placement in cubby but this helps alot!
btw, what is the switch assembly for? Doesn't the finisher cover the gaping area where the buttons go?
Didn't mean to bomb thread btw, gl with sale!
btw, what is the switch assembly for? Doesn't the finisher cover the gaping area where the buttons go?
Didn't mean to bomb thread btw, gl with sale!
Last edited by nismofreak1208; 06-01-2013 at 04:15 AM.
06-05-2013, 01:01 PM
#12
Registered User
Join Date: Jun 2013
Location: America the Beautiful
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Niiiiiiiice looking nismo. Really liking those volks too (even though the stock rays are some of the nicest stock wheels available)
Wish this had been available a few months ago, couldn't find a black one with low miles anywhere.
Wish this had been available a few months ago, couldn't find a black one with low miles anywhere.
06-06-2013, 07:30 PM
#14
Registered User
Thread Starter
iTrader: (2)
Join Date: Dec 2007
Location: Stockton, Ca
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
WOW, thank you!! I have exact screen and navi unit, was trying to be ingenious with placement in cubby but this helps alot!
btw, what is the switch assembly for? Doesn't the finisher cover the gaping area where the buttons go?
Didn't mean to bomb thread btw, gl with sale!
btw, what is the switch assembly for? Doesn't the finisher cover the gaping area where the buttons go?
Didn't mean to bomb thread btw, gl with sale!
06-06-2013, 07:34 PM
#15
Registered User
Thread Starter
iTrader: (2)
Join Date: Dec 2007
Location: Stockton, Ca
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
mines here waiting for a new owner Price is OBO and I'm open to reasonable offers
06-07-2013, 01:38 AM
#16
Registered User
Join Date: Oct 2007
Location: N. Las Vegas/Japan
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Sounds good thanks. We'll talk it over and decide if we want to up her amount. We're not in a rush seeing as I won't be back to the states until August and she won't be back until November. So we have about 2 months to look for a car.
