When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Guys.. with all due respect.. Dealer installed twins almost makes no sense.. with what it takes to support twin turbos that output 600hp in a Z? wrong thread I know.. but "here's what I did today" to keep the post relevant... a few new stainless lines on the engine bay.. this car is twin turbo with 550 to the wheels on alcohol injection and 93 octane pump gas. no dealer wants to help you "Deal" with the headaches of supporting mods it takes to reliably put down 600 in a Z. It requires SO much more than just turbos and an intercooler. ... the mods list needs to be a mile long and include a built engine and drivetrain mods if u plan to run any real amount of boost without grenading parts.
Buying a "dealer installed" turbo kit just sounds like recipie to me for a difficult le$$on... I guess that can be said tho buying any NA car modded to Turbo no matter who u buy from.
At least private buyer you won't get raped on the price for a turbo car if u know what yur looking for...
Installed the G37 Axle/Hub into my 350z. It fits! Thanks RJ manufacturing for telling me about it. Why did I do it you may ask? Hub is twice as large as shown and my wheel bearing was shot.
Installed the G37 Axle/Hub into my 350z. It fits! Thanks RJ manufacturing for telling me about it. Why did I do it you may ask? Hub is twice as large as shown and my wheel bearing was shot.
Installed the G37 Axle/Hub into my 350z. It fits! Thanks RJ manufacturing for telling me about it. Why did I do it you may ask? Hub is twice as large as shown and my wheel bearing was shot.
I am planning on doing the same, they posted this up on their fb page. Also selling kits for $400 to swap bearing, hub and axles. Splines are larger at the hub and axle shafts are larger. Seeing the much wider bearing surface should help alot with major offset wheels and track abuse. I tip my hat off to RJM .
I am planning on doing the same, they posted this up on their fb page. Also selling kits for $400 to swap bearing, hub and axles. Splines are larger at the hub and axle shafts are larger. Seeing the much wider bearing surface should help alot with major offset wheels and track abuse. I tip my hat off to RJM .
Exactly what it says. I took the stock G37 axle and wheel hub assembly and put it on the Z with no additional modification. It slides in perfectly and you don't have to push on a new wheel bearing if yours are getting worn out. Just replace it all.
@Nismo They are chargespeed side splitters. Bolt onto the OEM Z sideskirts.
Exactly what it says. I took the stock G37 axle and wheel hub assembly and put it on the Z with no additional modification. It slides in perfectly and you don't have to push on a new wheel bearing if yours are getting worn out. Just replace it all.
@Nismo They are chargespeed side splitters. Bolt onto the OEM Z sideskirts.
found on the FB thanks. Looks to be direct bolt on.
I never noticed a particular noise before or after the fluid swap. And now I have a JWT clutch and flywheel setup. So all I hear is chatter at idle. I read some things about that but never experienced it.
But it's also my first Z and I changed the fluid before I had 100 miles of driving. So maybe I didn't have the opportunity to hear the noise difference.
I did notice an increase in the crispness of the shifting though. It was pretty significant.
11-18-2016, 06:45 PM
