350z rear nismo add ons
10-10-2015, 02:59 AM
#1
Registered User
Thread Starter
350z rear nismo add ons
hi
do you have guys any expierence with buying them from proven vendor?
all i want is good fitment
I bought one set from extreme dimension and fitment is horrible
do you have guys any expierence with buying them from proven vendor?
all i want is good fitment
I bought one set from extreme dimension and fitment is horrible
The following users liked this post:
VORTECH350 (10-11-2015)
The following users liked this post:
VORTECH350 (10-11-2015)
The following users liked this post:
VORTECH350 (10-11-2015)
10-10-2015, 08:52 PM
#5
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
I have shine on my car, they fit good, not perfect but pretty darn good. Next bodywork I get will either be shine or from https://my350z.com/forum/body-exteri...le-inside.html depending on weight
The following users liked this post:
VORTECH350 (10-11-2015)
10-10-2015, 09:22 PM
#6
Hi -- new to the site but been lurking around for a good little while. I bought BriGuyMax's Z a few months back and have since added rear Nismo spats... If you are ok with ebay cheap versions --- these fit perfectly with pretty much zero modification or hassle --- no cutting, etc.
Search Ebay for "FRP Nismo Version 1&2 Rear Bumper Spats For 02-08 Nissan 350Z Z33" and then look for seller Yachant2011. $145 shipped for the pair. I think makes some carbon fiber versions too.
Couple of pics for reference...
(throw in a pic of front/sides too -- also ebay cheapies and fit great! none of the skirts/spats are painted in these pics - still look decent but would need finishing to paint)
Thanks -- u motivated me to register so I could reply.
Search Ebay for "FRP Nismo Version 1&2 Rear Bumper Spats For 02-08 Nissan 350Z Z33" and then look for seller Yachant2011. $145 shipped for the pair. I think makes some carbon fiber versions too.
Couple of pics for reference...
(throw in a pic of front/sides too -- also ebay cheapies and fit great! none of the skirts/spats are painted in these pics - still look decent but would need finishing to paint) Thanks -- u motivated me to register so I could reply.
Last edited by Putzy; 10-10-2015 at 10:02 PM.
The following users liked this post:
VORTECH350 (10-11-2015)
Trending Topics
10-11-2015, 05:08 AM
#8
Sure no prob I'll snap close ups and post then up here shortly... i tacked mine on with screws on the upper... not the cleanest but you can just as easy use adhesive on the upper for an invisible mount look and just tack the underneath with screws that are out of sight.
I didn't paint them but it's a nuisance when u do... undercarriage parts like these get the rock chips so easily when u spitting 600 ponies! Cruddy roads in CLE OH don't help either :P
I didn't paint them but it's a nuisance when u do... undercarriage parts like these get the rock chips so easily when u spitting 600 ponies! Cruddy roads in CLE OH don't help either :P
Last edited by Putzy; 10-11-2015 at 05:14 AM.
10-11-2015, 05:24 AM
#9
Here u go...
Third pic I tried to show the underneath lip they build into the spat --- it mates up flush to the underneath of the fender and you can go to town tacking screws along that line... enough strength in that alone to hold it firmly in place... then just need thick 3m adhesive to mount at top and u could add two screws inside the wheel well which all would be out of site. I went to crazy strong mount and just tacked 3 screws right along top because, well, frankly i don't like dealing with 3m adhesive.. turned out good for my standards I like the rough "race" look of this kit overall and it's stands up to rocks and debris like no other!!
Third pic I tried to show the underneath lip they build into the spat --- it mates up flush to the underneath of the fender and you can go to town tacking screws along that line... enough strength in that alone to hold it firmly in place... then just need thick 3m adhesive to mount at top and u could add two screws inside the wheel well which all would be out of site. I went to crazy strong mount and just tacked 3 screws right along top because, well, frankly i don't like dealing with 3m adhesive.. turned out good for my standards I like the rough "race" look of this kit overall and it's stands up to rocks and debris like no other!!
Last edited by Putzy; 10-11-2015 at 05:27 AM.
10-12-2015, 03:30 PM
#12
Ok... what are u unhappy with.. 3 visible screws? The other option is adhesive which u gonna need no matter what brand.. the spat does not just automatically attach atop the fender.
In my humble opinion it fit well for those who have worked with FRP before you'll understand what I mean if u try the kit.... it's flexible and no FRP piece I've ever seen just sits in place perfectly without adhesive and/or screws to hold it.. it's not magic nor does its install itself if that's what you were asking to find out. If the shine does then great.. just reporting yur options.
In my humble opinion it fit well for those who have worked with FRP before you'll understand what I mean if u try the kit.... it's flexible and no FRP piece I've ever seen just sits in place perfectly without adhesive and/or screws to hold it.. it's not magic nor does its install itself if that's what you were asking to find out. If the shine does then great.. just reporting yur options.
Last edited by Putzy; 10-12-2015 at 03:33 PM.
10-13-2015, 03:22 AM
#14
Sorry to displease! I guess I'm not as particular as some of you all. Im sure this may just fuel flaming but i dont mind.. who's Michael Quinn? I'll google later on when I hav more time.
Last edited by Putzy; 10-13-2015 at 03:23 AM.
Thread
Thread Starter
Forum
Replies
Last Post
UZ_
Buying/Leasing
8
10-15-2015 03:43 PM
