Gas gauge help
#1
New Member
Thread Starter
Gas gauge help
Hey so the other day I filled up and I let the gas pump go until the handle clicked them turned the car on and the needle went over the 'F' on the cluster, I also threw a code and was wondering if it was do to this as it had something to do with fuel, cleared the ecu. I have an 04 350z 6spd 34k miles
#3
New Member
Thread Starter
Well the code was followed by a few others, could have been due to unplugging the white AC box when I was doing the radio install (read online when looked up the code) but I don't think that would have anything to do with it reading over the F
#4
If you don't have the code there's not much I can do to help.
https://my350z.com/forum/maintenance...d-to-fill.html
https://my350z.com/forum/maintenance...d-generic.html
https://my350z.com/forum/maintenance...d-to-fill.html
https://my350z.com/forum/maintenance...d-generic.html
The following users liked this post:
Z33E (05-01-2016)
#5
New Member
I got a cel when I installed my radio as well. Don't remember what it was now but I remember I had to take the dash apart again a few days later to hook up antenna and got the same code.
The following users liked this post:
Z33E (05-01-2016)
#6
Registered User
Going over Full on the fuel gauge is not going to cause the CEL to come on. The code must have been connected with something else, like both yourself and rearranged have said.
The following users liked this post:
Z33E (05-01-2016)
Thread
Thread Starter
Forum
Replies
Last Post
ThomBoh
Southern California
3
06-01-2016 03:23 AM
yosip1115
Forced Induction
3
04-15-2016 11:26 AM