ZedFed

I've plugged in the cable and it is still saying "Cable Not Connected". Tried through the cable management and it still does not work, i even went to install windows 7 just because I see they show no support under windows 10. It installed fine and even did the uprevupdaterfix.exe but refuses to work correctly. When I plug the cable to the computer, you hear that beep noise so it knows it's there as well as checking the device under the windows device management and it shows "working properly" so no bad driver install or anything.

Am I missing something or is there some process im missing? btw, I tried another obdII cable just for giggles and it loaded fine so it's no power issue between the ign and obd connector.

thanks

venture210

I had an issue simialr to this a while back. Make sure to use a healthy laptop (plenty of RAM, runs decently fast) and windows 8. Also try uninstalling and reinstalling the software directly from uprevs support page. LASTLY, plug in your cable along with the obd2 connector to the end of it (doesn't have to be connected to the car yet). These are all conditions in which my cable connection works perfectly fine. If that doesn't work, give us more details

QuintonC

iTrader: (2)

Give UpRev a call, they're super nice people and they're there to help you out.

ZedFed

Thanks man I actually called them again and after downloading a fresh copy after already downloading a fresh copy, Everything feel right into the basket and started working.. It's dumping right now. Probably gonna have to run to office depot for a laptop. Don't think this one is gonna make it to 1 hour

QuintonC

iTrader: (2)

Glad to hear you got it sorted out. Wish you the best!

coletrickle74

iTrader: (1)

For some reason mine won't work sometimes if it's not plugged in and charging. Might be some power saving deal I don't know. If the battery is it full it works fine

ZedFed

It works on my crap lappy but I just bought an HP Pavlion tablet and The Osiris tuner worked flawlessly. About to go outside and finally get the dump of the ECU so i can come in and play!... THANKS MIKE!!!

seymore4

iTrader: (27)

You shouldn't need to dump the ECU on a 350z, that's for newer unsupported vehicles. Just download the rom that corresponds with your ECU part # and you're good to go

ZedFed

I did actually after reading the dang piece of paper that comes with the product about to richen it up a bit and bump up timing a couple degrees. It's works flawless now especially when I bought this new tablet