350z VDC Fuse
#1
New Member
Thread Starter
350z VDC Fuse
Hello all, first time poster. I have a 2004 350z and i just finished replacing my steering wheel. I removed the VDC fuse on accident thinking it was the horn relay and actually lost the fuse. I replaced it, and now the VDC light and SLIP light are on and the ABS seems to test itself every time I start my car and drive 10 feet, then it allows me to drive normal but the lights remain on. I removed the connection to the battery and made it again hoping that would reset everything but it didnt. Anyone have any idea what I can do? Thanks in advance.
#3
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Stock wheel or aftermarket ?
#4
New Member
iTrader: (6)
When you replaced the wheel, you may have moved the steering angle sensor. That will cause this. You'll need a scanner that can read steering angle and make sure it's at 0 degrees with the wheel straight up. If not, you either need to re-do the steering wheel install or do a steering angle sensor relearn with a Nissan Consult computer.