|
1st thing we do now is unfasten the battery terminals. Always remove the negative terminal 1st, then the positive last. If you've noticed, after I removed the positive terminal I used the red plastic terminal protector that came with the Yellow Top battery, to cover the OEM battery's positive post. This keeps unwanted sparks from flying around while you working on the battery removal.
Next step is to remove the front nut that fastens the battery latch down. You'll need a 10mm deep socket for this one. Notice in the last picture there is a 2nd nut holding the latch down at the rear of the battery. Don't worry about this one. Leave it alone.
__________________
Team Nextstage
Sponsored by Meguiar's
www.teamnextstage.com
Team DNF n00bslayer & eater of children............................................................ ...............
Last edited by vo7848; 06-07-2007 at 09:46 AM.
|