View Single Post
Old 06-06-2007, 08:57 AM   #6
vo7848
Moderator
350Z, OT, & Engine
 
vo7848's Avatar
 
Join Date: Jun 2005
Location: Down Under & Dirty
Posts: 26,795
iTrader: (21)
Next we are going to clear all cables and obsticles that are in the way. Do yourself a favor and don't skip this step. You can probably manage getting the battery out without pulling back all the junk that's in the way, but it's not worth it.

You'll have to unplug the windshield fluid wiper hose. The little connector pulls off of the black hose real easy. Unplug it then pull it back and lay it next to the plenum.

Remove the black fuse box by wedging a small screw driver in the little securing tab. The fuse box will not totally come out of the engine bay, but you can slide it out of the way once you'll removed it from the bracket.

Last, pull the postive cable back. But first you'll have to pull the rubber bushing out of the frame.(refer to picture). I use a zip-tie to hold it back and out of the way.
Attached Images
File Type: jpg IMGP2339.JPG (241.0 KB, 30 views)
File Type: jpg IMGP2341.JPG (232.4 KB, 46 views)
File Type: jpg IMGP2345.JPG (204.0 KB, 25 views)
File Type: jpg IMGP2342.JPG (219.7 KB, 34 views)
File Type: jpg IMGP2343.JPG (214.9 KB, 47 views)
__________________
Team Nextstage
Sponsored by Meguiar's
www.teamnextstage.com
Team DNF n00bslayer & eater of children............................................................ ...............
vo7848 is offline   Reply With Quote