So i finally got the car back from MRC and all i gotta say is....DAM, its fast.
They did their thing with it after i had some problems with my built motor. Heres the story...I had my aps tt installed by them about a year and a half ago.
At that time they also built my motor, or i should say their engine guy they were using at the time did my motor. Long story short, he didnt do such a good job and i ended up having some oil leaks and other problems. The guys at MRC found the oil leaks the last time it was in there getting the aps 3" exhaust, test pipes, and plenum installed. So they found the leaks and of course the motor had to be pulled. So without any problems or fighting with them about it they set up a day and pulled the motor. It goes without saying but they are no longer using that guy to do their engines. So they pulled my motor and Matt over at MRC did all the work. He stripped it down to pretty much a bare block. He checked everything out, made sure everything was perfect and put it all back together. Sure i bugged everyone over there a bunch of times while the car was there but they are always good at letting me know whats going on. I decided to post this up cuz not all shops would have been so good with taking care of this so fast...It ended up being a year later that i noticed the leak and they still didnt even think twice about yankin that motor out. Now thats customer service if u ask me...Matt over there knows his sh!t for sure, Julian is ok too i guess
...and the rest of the MRC crew is awesome...so now for the numbers...
511hp @12.5 psi
i thought this pulled hard when i was at 412hp before they just did the exhaust and stuff....but now its just crazy! So a big thanx to the guys at MRC. I got the dyno sheet and i'll post it up and some pics later...