MY350Z.COM Forums - View Single Post - Did Some UTEC Logging

athenG · 07-29-2008, 07:18 AM

/\ +1
OP,
set your Map Max value to only 10 so that you'll get a better resolution also you mentioned that your A/F in the winter is around 11.3-11.5 which is pretty normal and conservative enough in my book. This lead me to believe that SGP did not set your Temp Compensation since now you are getting low 10's in the hot summer days. I don't blame SGP since it is hard to replicate that range of a temp in the dyno shop so you have to go back or set it up yourself. Like Quadcam said timing is really low especially in the higher rpm, can you check your Temp Compensation in Utec if it is adjusting the timing also? You don't want Utec adjusting timing when it is compensating for the IAT. I think you should go back to a tuner since there is a lot to be tweaked and I think you have a lot more power to squeeze out of that setup.

07-29-2008, 07:18 AM	#16
athenG Registered User Join Date: Nov 2005 Location: NYC Posts: 1,649 iTrader: (2)	/\ +1 OP, set your Map Max value to only 10 so that you'll get a better resolution also you mentioned that your A/F in the winter is around 11.3-11.5 which is pretty normal and conservative enough in my book. This lead me to believe that SGP did not set your Temp Compensation since now you are getting low 10's in the hot summer days. I don't blame SGP since it is hard to replicate that range of a temp in the dyno shop so you have to go back or set it up yourself. Like Quadcam said timing is really low especially in the higher rpm, can you check your Temp Compensation in Utec if it is adjusting the timing also? You don't want Utec adjusting timing when it is compensating for the IAT. I think you should go back to a tuner since there is a lot to be tweaked and I think you have a lot more power to squeeze out of that setup.