View Single Post
Old 08-10-2008, 07:45 PM   #3
Peak350
Registered User
 
Join Date: Jan 2007
Location: DeLand, Florida
Posts: 1,143
iTrader: (2)
Send a message via AIM to Peak350
Quote:
Originally Posted by ZeezCustomz
Hey everyone, didn't have much luck on searching for common launch RPM's

I have an 03' Touring 6MT, mods include Motordyne 5/16" spacer, JWT pop, and a Bassani true dual exhaust. I will most likey be running the stock rubber, Potenza SO3's. I am very familiar with the track, ran many cars there in the past. Going back with my new Z (haven't been to the track in 2 years) and I am curious what people are launching at.

I have ready 2000-3500rpm's, with my setup what would be a good starting point? Also, what are common shift points, tire pressure, and any suggestions on shifting from 1st to 2nd to prevent wheel spin.
Shifting - lift 1->2, can hold throttle or slightly lift for the rest.

I've been launching my car ~5,000-5,500 - but toasted the flywheel after 100 passes or so. Veetec said he launched around that same area in his 04, so you might use that as a reference.

There are too many track variances to give a steadfast rule though. Some nights I launch below 3000 to get the right 1/8th time. I watch my 330' and 1/8th time more carefully than anything else as they contain the launch and most important shifts.
__________________
*stock* 2007 SMB 6-speed Enthusiast - 13.239 @ 105.67 and going for more
Peak350 is offline   Reply With Quote