03 with rev up swap
#1
New Member
Thread Starter
iTrader: (4)
Join Date: May 2004
Location: Mississauga
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
03 with rev up swap
Hello,
I have a 03 track with a vortech supercharger. Yesterday found out the car has a lots of white smoke when it's boost. So my mechanics think it might be the piston rings or crack cylinder wall.
And i have a 06 rev up spare long block in my garage. Anyone knows what parts i need to swap the rev up into my 03 track or it's direct bolt on?
Thanks
Jacky
I have a 03 track with a vortech supercharger. Yesterday found out the car has a lots of white smoke when it's boost. So my mechanics think it might be the piston rings or crack cylinder wall.
And i have a 06 rev up spare long block in my garage. Anyone knows what parts i need to swap the rev up into my 03 track or it's direct bolt on?
Thanks
Jacky
#2
Registered User
Join Date: Nov 2008
Location: Kansas City, MO
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
it is possible but i am not 100% sure. Haven't heard of an upgrade like that.. Probably less of a hassel to pull yours and rebuild. Most likly you fried your rings..
#4
New Member
Thread Starter
iTrader: (4)
Join Date: May 2004
Location: Mississauga
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
What do i need if i want to put the whole rev up long block in my 03? Ecu, engine harness or somethings else?
Thanks for help. I appericate.
Last edited by jacky ngai; 04-13-2009 at 07:57 AM.
#6
Viper Sellout
iTrader: (84)
I know you will @ the LEAST need a ECU and engine harness to swap the whole thing.
I wouldn't put that 06 motor in my car without getting is checked out 1st. Many 06 motor's had oil consuption issues which is why you can find them cheap.
#7
Registered User
iTrader: (85)
i just swapped my old de for a built 06 revup. you will need the revup ecu/harness (roughly $800), 2 extra cam sensors (roughly $70 each), and a nissan dealership to reprogram your key fob to your ecu (they charge for 1 hour--$105 and your car has to be there)...imho just build your 03..or if worse comes to worse, use the 06 block but swap heads, and +1 for zul8r's point on oil consumption
Trending Topics
#9
New Member
Thread Starter
iTrader: (4)
Join Date: May 2004
Location: Mississauga
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Correct, the shortblocks are the same. All you'll need is some new headgaskets.
I know you will @ the LEAST need a ECU and engine harness to swap the whole thing.
I wouldn't put that 06 motor in my car without getting is checked out 1st. Many 06 motor's had oil consuption issues which is why you can find them cheap.
I know you will @ the LEAST need a ECU and engine harness to swap the whole thing.
I wouldn't put that 06 motor in my car without getting is checked out 1st. Many 06 motor's had oil consuption issues which is why you can find them cheap.
Thanks
#10
New Member
Thread Starter
iTrader: (4)
Join Date: May 2004
Location: Mississauga
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
i just swapped my old de for a built 06 revup. you will need the revup ecu/harness (roughly $800), 2 extra cam sensors (roughly $70 each), and a nissan dealership to reprogram your key fob to your ecu (they charge for 1 hour--$105 and your car has to be there)...imho just build your 03..or if worse comes to worse, use the 06 block but swap heads, and +1 for zul8r's point on oil consumption
Thanks
#14
Banned
iTrader: (1)
Join Date: Feb 2004
Location: Dayton, OH
Posts: 2,128
Likes: 0
Received 0 Likes
on
0 Posts
I have an '05 rev up ECU for sale from a G35 - should be close enough to work.
Does the motor not have the harness on it?
bbs350z - If you already have a rev up motor why would you need two more cam sensors? The cam sensors should already be on the motor.
Does the motor not have the harness on it?
bbs350z - If you already have a rev up motor why would you need two more cam sensors? The cam sensors should already be on the motor.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM