shiftdrift06

iTrader: (24)

Driving home last night, and I glanced at my Oil Pressure Gauge, and it is peg out to the max, pass 120.

I nearly had a heart attack, and pulled over turned off the engine. I then turn the car on in ACC, with the engine off, and the Gauge jumped back up to @120.

So, I am guessing the Sensor or Gauge is faulty? Because it is not possible to have pressure with the engine off correct?



Also, does having the gauge max out, messes up the gauge the itself?
Should I un hook the sensor until I get a New Sensor, assuming that is the problem?

davidv

iTrader: (2)

Same happened to me after a day of drag racing. Replace this sensor and you should be good to go.

Nexx

iTrader: (41)

Yep I need to get it replaced too.

tylerxfire

iTrader: (15)

very easy fix but the part is expensive..best place i found to buy it and that had it in stock since my dealership didnt and charged up the *** for it anyway was courtesyparts.com

http://www.courtesyparts.com/25070-s...tml?cPath=714&

Gingervitis526

iTrader: (19)

This sounds horrible but if it pegs out try hitting the top of the gauge cluster with your hand.... that's what I have to do if if gets stuck....

tylerxfire

iTrader: (15)

u must have something wrong with the gauge or a loose connection then..the op has the same symptoms as i had and im sure its his oil pressure sensor or oil sending unit whichever u choose to call it...

yours does this often though? and goes back to normal after hitting it always?

Gingervitis526

iTrader: (19)

Yes, it has to be the gauge. It works everytime for me. Sometimes it gets stuck in the middle as well when I am just idling. I havent tried replacing the gauge though.... or the oil pressure sending unit. It doesnt happen very often though to me.

SS21CA

iTrader: (7)

I have the same issue. I nice slap on the head and the gauge works again.

Gingervitis526

iTrader: (19)

Good to hear I am not alone. I hate doing it though, its just embarrassing lol

shiftdrift06

iTrader: (24)

Thanks for all the replies you guys. I got a spare Sensor and swap it out, and now the gauge is back on point.
Thanks again.

tylerxfire

iTrader: (15)