Notices
Exterior & Interior 350Z Body modification, interior styling and lighting
Sponsored by:
Sponsored by:

Windows roll down on their own...

Old 04-01-2010, 09:09 PM
  #1  
350Z_Al
Registered User
Thread Starter
 
350Z_Al's Avatar
 
Join Date: Sep 2008
Location: Winnipeg, MB
Posts: 908
Received 28 Likes on 24 Posts
Default Windows roll down on their own...

I parked my car for the winter. I was doing some unrelated work on the car (speakers) and killed the battery with the drivers door switch module disconnected. When I reconnected it with a almost dead battery (didn't know it was almost dead) the windows rolled them selves down.

Now that I have replaced the battery with a new one every time I turn the ignition off after driving, or unlock the car both windows will roll all the way down by themselves...

Anybody know what the hell is going on?
Old 04-01-2010, 09:25 PM
  #2  
350Z_Al
Registered User
Thread Starter
 
350Z_Al's Avatar
 
Join Date: Sep 2008
Location: Winnipeg, MB
Posts: 908
Received 28 Likes on 24 Posts
Default

Just like to say that yes, I did search. This doesn't seem like the typical window problem that we have because it's both windows doing the exact same thing and not just one window acting up.

I'm going to try the reset tomorrow morning and see how that goes anyways though.
Old 04-01-2010, 10:15 PM
  #3  
marques1
Registered User
iTrader: (5)
 
marques1's Avatar
 
Join Date: Jun 2006
Location: austin, texas
Posts: 5,097
Likes: 0
Received 6 Likes on 3 Posts
Default

have you tried to recet the ecu yet?
Old 04-02-2010, 02:15 AM
  #4  
*Boose*
Registered User
iTrader: (3)
 
*Boose*'s Avatar
 
Join Date: Dec 2008
Location: Rapid City, SD Ellsworth AFB
Posts: 1,447
Likes: 0
Received 0 Likes on 0 Posts
Default

How long are you holding the unlock button?
Old 04-02-2010, 02:16 AM
  #5  
duro78
Registered User
iTrader: (6)
 
duro78's Avatar
 
Join Date: Oct 2008
Location: ny
Posts: 1,582
Likes: 0
Received 0 Likes on 0 Posts
Default

Its the switch unit that the ***** are attached to inside the door panel
Old 04-02-2010, 06:20 AM
  #6  
chuquison
Registered User
iTrader: (6)
 
chuquison's Avatar
 
Join Date: Sep 2005
Location: san diego, ca- daytona beach,
Posts: 1,944
Likes: 0
Received 0 Likes on 0 Posts
Default

i had this happen to me before I had to replace the part that is not the window motor I forget what its called. this happend to me after I had my damn alarm installed and they disconnected the battery and replaced it. I guess it fries this part but I am having a brain fart on thinking the name of the part right now.
Old 04-02-2010, 02:59 PM
  #7  
350Z_Al
Registered User
Thread Starter
 
350Z_Al's Avatar
 
Join Date: Sep 2008
Location: Winnipeg, MB
Posts: 908
Received 28 Likes on 24 Posts
Default

Thanks for the ideas guys.. I noticed today is is NOT right when I turn the ignition off, but when I open the door after turning the ignition off.

Originally Posted by *Boose*
How long are you holding the unlock button?
I am just tapping it. I am aware of the feature that if you hold it for a few seconds the windows roll down.

Originally Posted by chuquison
i had this happen to me before I had to replace the part that is not the window motor I forget what its called. this happend to me after I had my damn alarm installed and they disconnected the battery and replaced it. I guess it fries this part but I am having a brain fart on thinking the name of the part right now.
That sucks lol.. Is it the switch module with the window switches on it that you had to replace?

Originally Posted by marques1
have you tried to recet the ecu yet?
I had the battery disconnected for a half hour, that should have done it I think.

I'm going to take the door panel apart and check for bent pins in the connector, I remember somebody else having that problem before.

Last edited by 350Z_Al; 04-02-2010 at 03:02 PM.
Old 04-02-2010, 06:37 PM
  #8  
J. Dub
Registered User
iTrader: (18)
 
J. Dub's Avatar
 
Join Date: Sep 2008
Location: In your internets.
Posts: 1,335
Likes: 0
Received 0 Likes on 0 Posts
Default

Please update us on progress. Thanks
Old 04-02-2010, 08:16 PM
  #9  
350Z_Al
Registered User
Thread Starter
 
350Z_Al's Avatar
 
Join Date: Sep 2008
Location: Winnipeg, MB
Posts: 908
Received 28 Likes on 24 Posts
Default

Originally Posted by J. Dub
Please update us on progress. Thanks
No new progress today unfortunately... I'm going to check out the pins in the connector in the door tomorrow. I'm crossing my fingers that is it, I have a road trip for a car show next weekend and this window thing is getting annoying real quick
Old 04-17-2010, 12:10 PM
  #10  
I DTW I
New Member
 
I DTW I's Avatar
 
Join Date: May 2009
Location: Columbus, Ohio
Posts: 211
Received 3 Likes on 3 Posts
Default

Mine has a similar problem but I have no idea what's causing it. It's only the passenger window, but when I use the auto-roll up feature they go all the way up, then the passenger window goes back down like to 75% up. So to get the window closed I have to tap it down before it gets all the way up, then inch it up with the manual up to the top (not the auto roll up).

Nothing is blocking it from going up, the battery wasn't disconnected when the problem started, but it was winter when it first started happening, and it's only the passenger one, the drivers side works fine. I probably should make a thread but I knew I should search and try here first.
Old 04-18-2010, 06:27 PM
  #11  
kelsey_kaye
Registered User
iTrader: (4)
 
kelsey_kaye's Avatar
 
Join Date: Nov 2007
Location: Texas
Posts: 1,531
Likes: 0
Received 0 Likes on 0 Posts
Default

I have this problem with my driver's side window. ^
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Obadabot
Maintenance & Repair
16
06-18-2023 11:31 PM
Siqcology
Maintenance & Repair
5
09-18-2019 01:45 PM
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM
MicVelo
NorCal Marketplace
9
10-04-2015 07:55 PM


Thread Tools
Search this Thread
Quick Reply: Windows roll down on their own...



All times are GMT -8. The time now is 12:24 AM.