Notices

FS: Greddy 8 piston 380mm front/ 4 piston 330mm rear big brake kit

 
Old 08-02-2012, 12:21 AM
  #1  
mdd
New Member
Thread Starter
iTrader: (4)
 
mdd's Avatar
 
Join Date: May 2011
Location: bay area, ca
Posts: 491
Likes: 0
Received 1 Like on 1 Post
Default Greddy 8 piston 380mm front/ 4 piston 330mm rear big brake kit

****************SOLD TO CHRISNELSON************















Testing water on selling this Greddy Brake kit which only has about 500-600 miles of usage

Reason for selling sold the garage queen car it was on and bought a 350z nismo. Prolly gonna track this vehicle in the future and with this brake kit you must run at least 19" rims to clear the caliper and rotor setup. Since I plan on tracking I want to be able to run a 18" wheel for track days. So it would be nice to be able to do that and thus I am considering selling this beautiful kit to buy another kit that accepts 18" wheels

I do not want to trade as I have something alreadly lined up. These are in excellent condition. Honestly these are more of a show car brake setup. They definitely perform but its in the looks department where they really amaze


Now 5200 shipped in the CONUS+ paypal fees 8-22-14


ALSO Please note you must use a 19" wheel to clear these brakes (the reason im trying to sell). Please check your wheel specs to make sure the spokes clear as well. I can answer questions about fitment as well and I think I have a brake caliper spec chart on my computer. Again these are not for everyone and probably if you ask me, more for looks that performance but they definitely do stop the car and stop other peoples eyes lol

onto the pics!

Last edited by mdd; 02-10-2015 at 12:02 PM. Reason: SOLD
mdd is offline  
Old 08-02-2012, 06:18 AM
  #2  
taywan
Registered User
iTrader: (53)
 
taywan's Avatar
 
Join Date: Mar 2011
Location: G'ville SC
Posts: 4,734
Received 4 Likes on 4 Posts
Default

Wow. Those are hot!!!!
taywan is offline  
Old 08-02-2012, 06:23 AM
  #3  
G35BAW
Registered User
iTrader: (1)
 
G35BAW's Avatar
 
Join Date: Dec 2011
Location: Spartanburg sc
Posts: 90
Likes: 0
Received 0 Likes on 0 Posts
Default Hella tight

Those are gold too! Man that's the baller **** right ther!
G35BAW is offline  
Old 08-02-2012, 08:51 AM
  #4  
mdd
New Member
Thread Starter
iTrader: (4)
 
mdd's Avatar
 
Join Date: May 2011
Location: bay area, ca
Posts: 491
Likes: 0
Received 1 Like on 1 Post
Default

thanks guys!!! the gold color is amazing. way more natural and subtle than the oem brembo calipers

here are some pics of them when i first unboxed and installed for comparison and eye candy


comparison of stock 03-05 brake rotors to these monsters!!


never even got to take a real nice pic of the car with the setup on bc it was rarely drive.... sad... this will have to do

Last edited by mdd; 02-10-2015 at 12:01 PM.
mdd is offline  
Old 08-02-2012, 09:19 AM
  #5  
taywan
Registered User
iTrader: (53)
 
taywan's Avatar
 
Join Date: Mar 2011
Location: G'ville SC
Posts: 4,734
Received 4 Likes on 4 Posts
Default

That is badazz!!
taywan is offline  
Old 08-02-2012, 03:29 PM
  #6  
03zcarfl
Registered User
iTrader: (5)
 
03zcarfl's Avatar
 
Join Date: Dec 2005
Location: nw florida
Posts: 421
Likes: 0
Received 0 Likes on 0 Posts
Default

my wife would divorce me and i kinda like her.. lol
03zcarfl is offline  
Old 08-02-2012, 04:51 PM
  #7  
lgear080
Registered User
iTrader: (21)
 
lgear080's Avatar
 
Join Date: Jan 2008
Location: MIAMI
Posts: 6,541
Likes: 0
Received 1 Like on 1 Post
Default

You can run 18s on this and other 380mm setups.

Glws.
lgear080 is offline  
Old 08-03-2012, 06:09 AM
  #8  
DunZcon
Registered User
 
DunZcon's Avatar
 
Join Date: Sep 2011
Location: Florida
Posts: 157
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by lgear080
You can run 18s on this and other 380mm setups.

Glws.
What 18 inch wheels will fit those monsters???? I have seen that and the guy habe to get some sick 19" to clear them They barely cleared my 19" enkei wheels on the height and the width.
DunZcon is offline  
Old 08-03-2012, 07:07 AM
  #9  
mvp2765
New Member
 
mvp2765's Avatar
 
Join Date: Jan 2009
Location: Chicago
Posts: 414
Likes: 0
Received 1 Like on 1 Post
Default

I have the time attacks also and not really feeling the color combo. But sick brakes
mvp2765 is offline  
Old 08-03-2012, 08:29 AM
  #10  
graffkid732
New Member
iTrader: (44)
 
graffkid732's Avatar
 
Join Date: Nov 2008
Location: New Jersey
Posts: 3,646
Received 11 Likes on 9 Posts
Default

I want : /
graffkid732 is offline  
Old 08-03-2012, 09:04 AM
  #11  
DunZcon
Registered User
 
DunZcon's Avatar
 
Join Date: Sep 2011
Location: Florida
Posts: 157
Likes: 0
Received 0 Likes on 0 Posts
Default

one thing i did notice is that the slotted sections are facing the other way. //// that way... My AP Racing Kit has the sections going this way \\\\\ from front to rear and that is how the instructions said to do them. Are yours wrong or did greddy design the interior of the rotors different?
DunZcon is offline  
Old 08-03-2012, 10:06 AM
  #12  
mdd
New Member
Thread Starter
iTrader: (4)
 
mdd's Avatar
 
Join Date: May 2011
Location: bay area, ca
Posts: 491
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by 03zcarfl
my wife would divorce me and i kinda like her.. lol
lol def wise not to go for it then


You can run 18s on this and other 380mm setups.

Glws.
its the caliper clearance that prolly wont fit the 18"

What 18 inch wheels will fit those monsters???? I have seen that and the guy habe to get some sick 19" to clear them They barely cleared my 19" enkei wheels on the height and the width.
yes def fits 19" with room to spare but its still not too much room

I have the time attacks also and not really feeling the color combo. But sick brakes
color combo looked good in person. just pics with my camera phone sucks. its just like having the factory brembos behind em. except its more natural and softer gold and a lot bigger

I want : /
get em! your baller build will complement this very well! very jdm! behind those ssr's you have it will look amazing!

one thing i did notice is that the slotted sections are facing the other way. //// that way... My AP Racing Kit has the sections going this way \\\\\ from front to rear and that is how the instructions said to do them. Are yours wrong or did greddy design the interior of the rotors different?
Its not the slots that determine the direction.... its actually the vanes inside the rotors. the vanes arent supposed to catch the air and force it into the center as many think. I was wondering about that too when i first got em. After reading the vanes inside the rotors are supposed to face backwards to vent out the heat generated by the rotors during extreme braking. So if you look inside the rotors you should see the vanes pointing to the back of the vehicle like this /////



someone buy this for your ultimate jdm build cause these are definitely show brakes!
mdd is offline  
Old 08-03-2012, 10:16 AM
  #13  
Nismo1534
Registered User
iTrader: (15)
 
Nismo1534's Avatar
 
Join Date: Apr 2009
Location: Oregon
Posts: 605
Likes: 0
Received 0 Likes on 0 Posts
Default

Although I commend Greddy on the unique and subtle color, I would LOVE to see this in a bold color, like red. I mean, comon, it a huge BBK that screams attention! Either way it's a gorgeous kit - I'm sure the right buyer is just around the corner - I just wish it were me!
Nismo1534 is offline  
Old 08-03-2012, 12:50 PM
  #14  
lgear080
Registered User
iTrader: (21)
 
lgear080's Avatar
 
Join Date: Jan 2008
Location: MIAMI
Posts: 6,541
Likes: 0
Received 1 Like on 1 Post
Default

These will clear 18" type-f's, te's, and tc-105n's in certain offsets
lgear080 is offline  
Old 08-03-2012, 01:37 PM
  #15  
mdd
New Member
Thread Starter
iTrader: (4)
 
mdd's Avatar
 
Join Date: May 2011
Location: bay area, ca
Posts: 491
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Nismo1534
Although I commend Greddy on the unique and subtle color, I would LOVE to see this in a bold color, like red. I mean, comon, it a huge BBK that screams attention! Either way it's a gorgeous kit - I'm sure the right buyer is just around the corner - I just wish it were me!
still can be you

and honestly with a kit this freakin big you get looks regardless of color. i actually like it subtle so it isnt like HEY LOOK AT ME I LIKE TO STAND OUT.

I was driving in stop and go traffic once when i went to a car meet and man you should of seen how many normal ppl in their cars were looking at the brakes as i rolled by lol.

These will clear 18" type-f's, te's, and tc-105n's in certain offsets
maybe id have to look at their specs ot make sure of that. i dono tho would be really tight if it does
mdd is offline  
Old 08-03-2012, 02:27 PM
  #16  
Nismo1534
Registered User
iTrader: (15)
 
Nismo1534's Avatar
 
Join Date: Apr 2009
Location: Oregon
Posts: 605
Likes: 0
Received 0 Likes on 0 Posts
Default

But....BUT I LIKE TO STAND OUT!

Last edited by Nismo1534; 08-03-2012 at 02:29 PM.
Nismo1534 is offline  
Old 08-06-2012, 09:22 PM
  #17  
jeffie7
Registered User
iTrader: (4)
 
jeffie7's Avatar
 
Join Date: Feb 2004
Location: Maryland
Posts: 16,862
Likes: 0
Received 3 Likes on 3 Posts
Default

These brakes cost almost as much as the 350z. People with money have moved on, the guys left are 18yo and driving a brand new to them 135k+ mile 350z.

Awesome brakes GLWS.
jeffie7 is offline  
Old 08-07-2012, 11:03 AM
  #18  
mdd
New Member
Thread Starter
iTrader: (4)
 
mdd's Avatar
 
Join Date: May 2011
Location: bay area, ca
Posts: 491
Likes: 0
Received 1 Like on 1 Post
Default

^ truth. someone will come around maybe lol
mdd is offline  
Old 08-07-2012, 11:49 AM
  #19  
jerseystyle
350Z-holic
iTrader: (22)
 
jerseystyle's Avatar
 
Join Date: Feb 2008
Location: FT Leonard Wood, MO
Posts: 5,134
Likes: 0
Received 3 Likes on 3 Posts
Default

Originally Posted by 03zcarfl
my wife would divorce me and i kinda like her.. lol
My wife already hates how much of my attention my car gets

GLWS OP!
jerseystyle is offline  
Old 08-12-2012, 06:25 AM
  #20  
bishop_98
Registered User
iTrader: (5)
 
bishop_98's Avatar
 
Join Date: Dec 2007
Location: GA
Posts: 229
Likes: 0
Received 0 Likes on 0 Posts
Default

I'm proving it IS possible to cry and drool at the same time.

BUMP
bishop_98 is offline  

Thread Tools
Search this Thread
Quick Reply: FS: Greddy 8 piston 380mm front/ 4 piston 330mm rear big brake kit



All times are GMT -8. The time now is 07:24 AM.