lil more install help
#1
Registered User
Thread Starter
Join Date: Jun 2002
Location: Edmonton
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
lil more install help
allright ive got a MRD-M500 amp waiting for my other 4chan to come in
do i have to connect both the remote wires to my HU so both wires go 2 the 1 off the stock harness
also is it safe in the mean time to run my rear MB Quart speakers off of the m500 amp
thx
do i have to connect both the remote wires to my HU so both wires go 2 the 1 off the stock harness
also is it safe in the mean time to run my rear MB Quart speakers off of the m500 amp
thx
#2
Registered User
Join Date: Jun 2002
Location: Plano, TX
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Reply
First, no you could just jump one from the other.. but the wire from the HU is a constant on once the ignition switch is turned on.. stupid design.. atleast that's how the Bose system works.
I noticed on person on here put a device in from Soundgate that gets a signal from a spkeaker lead and provides a remote voltage to the amp.. it's the TRIGSPKR model. Here is a link that has it for pretty cheap
http://www.circuitdeal.com/automotiv...ription-1.html $27.67
I noticed on person on here put a device in from Soundgate that gets a signal from a spkeaker lead and provides a remote voltage to the amp.. it's the TRIGSPKR model. Here is a link that has it for pretty cheap
http://www.circuitdeal.com/automotiv...ription-1.html $27.67
#3
Registered User
iTrader: (4)
Join Date: Dec 2002
Location: northeast p.a.
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
when i use 2 or more amps i normally put a relay in on the remote plus you can use it turn other things on as well ,like dvd ,nav or anything else you want to come on with the stereo.
Thread
Thread Starter
Forum
Replies
Last Post
Extreme Dimensions
Southern California
0
09-24-2015 03:35 PM