Double Din Stereo Install and Screen
#22
Registered User
Thread Starter
Join Date: Aug 2002
Location: CA
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
I have a silverstone performance, the leather seats were factory matched 2 tone with the interior colors.......i think it's graphite with silver inserts.
#23
Registered User
Join Date: Oct 2002
Location: walnut,CA
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Yo dude, DB huh Im just next door to you then. Im here in Walnut, maybe you can help me with my speaker install its going to be my first time take my door panels apart and connect speaker wires. I would love to see your Z in person as well, let me know if its coo with you.
#24
Registered User
Thread Starter
Join Date: Aug 2002
Location: CA
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Hey Jabroney12, u r definitely close by........i should finish my install in 1 or 2 days. If you need help on the install, maybe we can get together this weekend or something........let me know.
#25
Registered User
Join Date: Oct 2002
Location: walnut,CA
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
No prob bro, ur chinese too huh I noticed that from your pics. So am I, haha. Yah mabybe the weekends we can meet up or something and race down that Grand street towards DB it usually clear of cops until u hit valley. Any ways Im try to go ahead with the speaker install and see if I can install it myself cuz I can't stand the speakers, they're horrible. One question I have is there any splicing involved for the stock speaker wires because I am going to install components or is it just attaching it to the new speakers without doing any cutting and is a spacer really neccesary. Thanks for your help.
#26
Registered User
Thread Starter
Join Date: Aug 2002
Location: CA
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
The stock speakers come with a factory adapter that plugs in. You didn't say whether u r installing an amp or not. If u r, then u would definitely need to reroute the wires..........if not, and u r sticking with the factory head unit and all......just cut out the factory speaker plug and add on ur own adapter and plug into ur new speakers. As far as the spacers, i'm like 95% sure that u will need it........i installed diamonds which r pretty thin, and i still need them........good luck w/ ur install.
#27
Registered User
Join Date: Sep 2002
Location: So Cal
Posts: 1,368
Likes: 0
Received 0 Likes
on
0 Posts
Jabroney12
Hey Jabroney12,
Can you post pics of your install as well? I am interested in doing an upgrade on my car but don't really know what to expect. Are you changing out the HU as well? Well hope your install comes out well.
Can you post pics of your install as well? I am interested in doing an upgrade on my car but don't really know what to expect. Are you changing out the HU as well? Well hope your install comes out well.
#28
Registered User
Join Date: Sep 2002
Location: So Cal
Posts: 1,368
Likes: 0
Received 0 Likes
on
0 Posts
GixxerBB
GixxerBB,
When you are done do you mind if we meet up somewhere so I can check out your system. I live in Chino Hills so it's just next door to DB. I would like to see the quality of the video screen. Let me know if you can that would be cool.
When you are done do you mind if we meet up somewhere so I can check out your system. I live in Chino Hills so it's just next door to DB. I would like to see the quality of the video screen. Let me know if you can that would be cool.
#29
Registered User
Join Date: Oct 2002
Location: walnut,CA
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Well, i tried the installation earlier this afternoon and got everything off. But I'm having some problem getting the spacer to fit on my speakers either Im doing it wrong or its not suppose to fit flush. And since I dont have a solder iron I cant connect my the HU wires to my speakers. Im going to hold off on it until either I get enough funds to pay for an install or maybe have gibb help me out.
#30
Registered User
Thread Starter
Join Date: Aug 2002
Location: CA
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
350ZNow, i don't mind meeting after i finish my install, but i had a little accident yesterday and blew my amp out.........so i'm in the process of finding a replacement amp.........hopefully i'll be able to finish everything by this weekend.
#31
Registered User
Join Date: Sep 2002
Location: So Cal
Posts: 1,368
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by GixxerBB
350ZNow, i don't mind meeting after i finish my install, but i had a little accident yesterday and blew my amp out.........so i'm in the process of finding a replacement amp.........hopefully i'll be able to finish everything by this weekend.
350ZNow, i don't mind meeting after i finish my install, but i had a little accident yesterday and blew my amp out.........so i'm in the process of finding a replacement amp.........hopefully i'll be able to finish everything by this weekend.
#32
Registered User
Thread Starter
Join Date: Aug 2002
Location: CA
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
I know exactly what happened.........stupid me connected the wires wrong.........this just goes to show one shouldn't do an install in a dark garage..........o well, i'll be more careful next time. As of now, I'm looking at getting either the newer 5 channel MTX or the Soundstream Rubicon.........leaning towards the Soundstream tho.........hopefully everything will turn out good. When i'm done, i'll post and we can meet up somewhere.
#33
Registered User
Join Date: Oct 2002
Location: walnut,CA
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
If you want Amps Gixxerbb call this guy, he sells them for dirt cheap and the US acoustics are good for clean power alot of people reccomend them and steve is a nice guy too.
ZED AUDIO CORPORATION
759 Cochran Street, Units A & B, Simi Valley, CA 93065
Telephone (805) 526-5315 Fax (805) 526-8572 e-mail zedaudio@aol.com
COMPANY MODEL PWR/CH 4ohm PWR/CH 2ohm QTY PRICE
LANZAR SL50.4 50w x 4 90w x 4 2 $110 NEW
MTX 2300 150w x 2 250w x 2 1 $180 DEMO
THIS MTX IS A REALLY UNDER RATED AMP. ON CHECKING IT’S POWER RATING HERE IS WHAT I MEASURED AT 13.2v BATTERY: 275w x 2 AT 4 OHM AND 510w x 2 AT 2 OHM! …….A BEAST.
THESE BOSS AMPLIFIERS WERE MADE IN THE USA AND ARE ALL BRAND NEW. THE POWER SUPPLIES AND AMPLIFIERS ARE THE SAME AS THE USACOUSTICS. THE ONLY DIFFERENCE IS THE PREAMPLIFIER FEATURES AND OF COURSE THE CHASSIS.
BOSS C455 85w x 2 85w x 2 1 $42
BOSS C555 110w x 2 110w x 2 2 $49
BOSS C705 150w x 2 170w x 2 2 $52
BOSS C655 85w x 4 85w x 4 6 $62 SILVER
BOSS C805 150w x 4 210w x 4 2 $77
BOSS C1055 175w x 4 175w x 4 6 $82 SILVER
BOSS C1055 175w x 4 175w x 4 10 $82 WHITE
BOSS C1055 175w x 4 175w x 4 6 $82 VIOLET
BOSS C755 210w x 4 210w x 4 2 $72 WHITE
BOSS H265 60w x 2 60w x 2 1 $45
BOSS H565 110w x 2 110w x 2 1 $55
BOSS H765 150w x 2 150w x 2 1 $59
BOSS H765 150w x 2 150w x 2 1 $40 **
BOSS H865 210w x 2 210w x 2 1 $45 **
BOSS H665 85w x 4 95w x 4 83 $59
BOSS H665 85w x 4 95w x 4 2 $45 **
BOSS H965 150w x 4 250w x 4 25 $67
BOSS REV1200 180w x 4 255w x 4 2 $71
** THESE AMPS ARE NEW BUT DO NOT HAVE THEIR ORIGINAL GIFT BOXES
ALL THESE BOSS AMPLIFIERS ARE NEW.
BOSS CLR40 100w x 2 100w x 2 2 $35
BOSS CLR50 125w x 2 125w x 2 2 $39
BOSS CLR50 125w x 2 125w x 2 3 $29 **
BOSS CLR70 150w x 2 150w x 2 2 $45
BOSS CLR60 75w x 4 75w x 4 1 $45
BOSS CLR90 75w x 4 100w x 4 2 $75 5ch AMP
+150w x 1 +250w x 1
** THIS AMP IS NEW BUT DOES NOT HAVE IT’S ORIGINAL GIFT BOX
ON ALL THE BOSS AMPS (CHAOS, HAVOC AND CLR SERIES) THE RATINGS SHOWN ABOVE IS WHAT IS PRINTED IN THE MANUALS. SINCE I DESIGNED THESE AMPS I KNOW THAT THE ACTUAL CONTINUOUS POWER RATINGS ARE APPROXIMATELY 50% OF THE ABOVE FIGURES.
PLANET
AUDIO P1502 150w x 2 250w x 2 3 $59 **
THESE PLANET AUDIO AMPS ARE ALL NEW AND THE RATINGS ARE ALL REAL CONTINUOUS POWER. THEY ARE VERY HIGH QUALITY AMPLIFIERS AT A GREAT PRICE.
PLANET
AUDIO P275 75w x 2 150w x 2 1 $55
PLANET
AUDIO P2100 100w x 2 175w x 2 2 $65
PLANET
AUDIO P2150 150w x 2 250w x 2 2 $74
PLANET
AUDIO P450 50w x 4 75w x 4 9 $68
LOOKING FOR A REAL HIGH CURRENT AMPLIFIER, THEN LOOK AT THESE AMPS WE MADE FOR CRUNCH AUDIO. THESE AMPS DELIVER 200 watts/ch INTO A 0.5 OHM LOAD (BRIDGABLE INTO A 1 OHM LOAD) AT 12v BATTERY. THESE AMPS DO NOT HAVE ANY CROSSOVERS BUT ARE BUILT LIKE BRICKS. THEY HAVE MASSIVE BLACK ANODIZED HEATSINKS.
CRUNCH CR50HC 25w x 2 50w x 2 30 $99
USACOUSTICS
THSE AMPS HAVE BEEN REFURBISHED BY ZED AUDIO. WE ARE THE ORIGINAL MANUFACTURERS OF THESE AMPLIFIERS.
THE “USA” SERIES ARE THE OLDER SERIES AND HAVE LOW PROFILE HEATSINKS, IDEAL FOR FITTING UNDER SEATS. THEY COME IN GREY OR CHROME AS SHOWN
THE “USX” SERIES HAS A MUCH LARGER BLUE PAINTED HEATSINBK AND THERE ARE 2 TYPES OF AMPS. THE USX2050,2080,2100,2150,4065,4085 ARE ALL MOSFET AMPLIFIERS.
THE USX600F,800F AND 1000F ARE NO COMPROMISE HIGH END AMPS VERY SIMILAR TO THOSE WE BUILT FOR HIFONICS, RODEK, AUTOTEK ETC. THEY ALL HAVE FULLY REGULATED POWER SUPPLIES AND USE EXOTIC CIRCUITRY FOR THE AUDIO AMPLIFIERS INCLUDING THE USE OF THE SUPER HIGH POWER TOSHIBA OUTPUT TRANSISTORS.
PLEASE NOTE THAT NEARLY ALL ARE IN THEIR ORIGINAL BOXES, BUT THE BOXES ARE NOT IN PRISTINE CONDITION. SOME DO NOT HAVE THE ORIGINAL MANUALS AND SO WE SUPPLY COPIES.
COMPANY MODEL PWR/CH 4ohm PWR/CH 2ohm QTY PRICE
USA 2075 75w x 2 100w x 2 0 $45 G
USA 2100 100w x 2 150w x 2 2 $55 G
USA 2150 150w x 2 250w x 2 0 $70 G
USA 2200 200w x 2 300w x 2 15 $99 G
USA 2200 200w x 2 300w x 2 12 $99 C
USA 2300 300w x 2 450w x 2 16 $139 G
USA 4050 50w x 4 75w x 4 7 $60 G
USA 4060 60w x 4 80w x 4 3 $63 G
USA 6300 50w x 4 75w x 4 3 $129 G 5ch AMP
+150w x 1 +250w x 1
G = GREY HEATSINK
C = CHROME HEATSINK
THE FOLLOWING SECTION – THE AMPLIFIERS ARE IN GIFT BOXES
USX 2050 50w x 2 75w x 2 4 $45
USX 2080 80w x 2 120w x 2 9 $55
USX 2150 150w x 2 250w x 2 35 $89
USX 4065 65w x 4 90w x 4 25 $80
USX 600F 200w x 2 300w x 2 28 $130
USX 800F 300w x 2 400w x 2 31 $158
USX 1000F 400w x 2 500w x 2 11 $195
IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL ME OR CALL AT THE ABOVE ADDRESS/PH #. MY OFFICE HOURS ARE 9.00 A.M. – 5.00 P.M. MONDAY – THURSDAY.
THE PREFERRED METHOD OF PAYMENT IS VIA MONEY ORDER. THIS ALLOWS US TO SHIP THE SAME DAY THE MO IS RECEIVED (EXCEPT FRIDAYS) CHEQUES MUST WAIT 14 DAYS TO CLEAR. SHIPPING IS VIA UPS GROUND UNLESS OTHERWISE SPECIFIED.
AMPLIFIER INFORMATION SECTION
* PLANET AUDIO 2 CHANNEL AMPS HAVE LOW AND HIGH PASS CROSSOVERS
* PLANET AUDIO 4 CHANNEL AMPLIFIERS HAVE LOW PASS AND FIXED 160Hz HIGH PASS CROSSOVERS.
* BOSS “CLR” 2 CHANNEL AMP HAVE LOW PASS X/OVER AND BASS + TREBLE CONTROLS
* BOSS “CLR” 4 CHANNEL AMPS HAVE THE SAME AS 2 CH BUT ON EACH PAIR OF CHANNELS
* BOSS 2 CH “CHAOS” AMPS HAVE LOW PASS X/OVER AND BASS BOOST AT 40Hz
* BOSS 4 CH “CHAOS” AMPS HAVE LOW PASS X/OVER
* BOSS 2 CH “HAVOC” AMPS HIGH AND LOW PASS X/OVERS, BASS + TREBLE
* BOSS 4 CH “HAVOC” AMPS HIGH AND LOW PASS X/OVERS, BASS
* USX 2 CH AMPS 2050,2080,2100 HAVE HIGH AND LOW PASS X/OVERS
* USX 2100, 2150, 600F, 800F, 1000F HAVE BASS BOOST
* USX2150, 600F, 800F,1000F HAVE LOW PASS CROSSOVER ONLY
• USX 4 CH AMPS HAVE LOW PASS ON EACH PAIR OF CH’s AND A MONO LOW PASS SIGNAL SECTION WITH LINE OUT.
• USA 2050-2150 HAVE LOW PASS CROSSOVER
• USA 2200/2300 HAVE LOW PASS X/OVER AND BASS BOOST
• USA 4050/4060 HAVE HIGH PASS CROSSOVERS x 2
• USA 4080 HAS 2 x HIGH PASS AND 1
ZED AUDIO CORPORATION
759 Cochran Street, Units A & B, Simi Valley, CA 93065
Telephone (805) 526-5315 Fax (805) 526-8572 e-mail zedaudio@aol.com
COMPANY MODEL PWR/CH 4ohm PWR/CH 2ohm QTY PRICE
LANZAR SL50.4 50w x 4 90w x 4 2 $110 NEW
MTX 2300 150w x 2 250w x 2 1 $180 DEMO
THIS MTX IS A REALLY UNDER RATED AMP. ON CHECKING IT’S POWER RATING HERE IS WHAT I MEASURED AT 13.2v BATTERY: 275w x 2 AT 4 OHM AND 510w x 2 AT 2 OHM! …….A BEAST.
THESE BOSS AMPLIFIERS WERE MADE IN THE USA AND ARE ALL BRAND NEW. THE POWER SUPPLIES AND AMPLIFIERS ARE THE SAME AS THE USACOUSTICS. THE ONLY DIFFERENCE IS THE PREAMPLIFIER FEATURES AND OF COURSE THE CHASSIS.
BOSS C455 85w x 2 85w x 2 1 $42
BOSS C555 110w x 2 110w x 2 2 $49
BOSS C705 150w x 2 170w x 2 2 $52
BOSS C655 85w x 4 85w x 4 6 $62 SILVER
BOSS C805 150w x 4 210w x 4 2 $77
BOSS C1055 175w x 4 175w x 4 6 $82 SILVER
BOSS C1055 175w x 4 175w x 4 10 $82 WHITE
BOSS C1055 175w x 4 175w x 4 6 $82 VIOLET
BOSS C755 210w x 4 210w x 4 2 $72 WHITE
BOSS H265 60w x 2 60w x 2 1 $45
BOSS H565 110w x 2 110w x 2 1 $55
BOSS H765 150w x 2 150w x 2 1 $59
BOSS H765 150w x 2 150w x 2 1 $40 **
BOSS H865 210w x 2 210w x 2 1 $45 **
BOSS H665 85w x 4 95w x 4 83 $59
BOSS H665 85w x 4 95w x 4 2 $45 **
BOSS H965 150w x 4 250w x 4 25 $67
BOSS REV1200 180w x 4 255w x 4 2 $71
** THESE AMPS ARE NEW BUT DO NOT HAVE THEIR ORIGINAL GIFT BOXES
ALL THESE BOSS AMPLIFIERS ARE NEW.
BOSS CLR40 100w x 2 100w x 2 2 $35
BOSS CLR50 125w x 2 125w x 2 2 $39
BOSS CLR50 125w x 2 125w x 2 3 $29 **
BOSS CLR70 150w x 2 150w x 2 2 $45
BOSS CLR60 75w x 4 75w x 4 1 $45
BOSS CLR90 75w x 4 100w x 4 2 $75 5ch AMP
+150w x 1 +250w x 1
** THIS AMP IS NEW BUT DOES NOT HAVE IT’S ORIGINAL GIFT BOX
ON ALL THE BOSS AMPS (CHAOS, HAVOC AND CLR SERIES) THE RATINGS SHOWN ABOVE IS WHAT IS PRINTED IN THE MANUALS. SINCE I DESIGNED THESE AMPS I KNOW THAT THE ACTUAL CONTINUOUS POWER RATINGS ARE APPROXIMATELY 50% OF THE ABOVE FIGURES.
PLANET
AUDIO P1502 150w x 2 250w x 2 3 $59 **
THESE PLANET AUDIO AMPS ARE ALL NEW AND THE RATINGS ARE ALL REAL CONTINUOUS POWER. THEY ARE VERY HIGH QUALITY AMPLIFIERS AT A GREAT PRICE.
PLANET
AUDIO P275 75w x 2 150w x 2 1 $55
PLANET
AUDIO P2100 100w x 2 175w x 2 2 $65
PLANET
AUDIO P2150 150w x 2 250w x 2 2 $74
PLANET
AUDIO P450 50w x 4 75w x 4 9 $68
LOOKING FOR A REAL HIGH CURRENT AMPLIFIER, THEN LOOK AT THESE AMPS WE MADE FOR CRUNCH AUDIO. THESE AMPS DELIVER 200 watts/ch INTO A 0.5 OHM LOAD (BRIDGABLE INTO A 1 OHM LOAD) AT 12v BATTERY. THESE AMPS DO NOT HAVE ANY CROSSOVERS BUT ARE BUILT LIKE BRICKS. THEY HAVE MASSIVE BLACK ANODIZED HEATSINKS.
CRUNCH CR50HC 25w x 2 50w x 2 30 $99
USACOUSTICS
THSE AMPS HAVE BEEN REFURBISHED BY ZED AUDIO. WE ARE THE ORIGINAL MANUFACTURERS OF THESE AMPLIFIERS.
THE “USA” SERIES ARE THE OLDER SERIES AND HAVE LOW PROFILE HEATSINKS, IDEAL FOR FITTING UNDER SEATS. THEY COME IN GREY OR CHROME AS SHOWN
THE “USX” SERIES HAS A MUCH LARGER BLUE PAINTED HEATSINBK AND THERE ARE 2 TYPES OF AMPS. THE USX2050,2080,2100,2150,4065,4085 ARE ALL MOSFET AMPLIFIERS.
THE USX600F,800F AND 1000F ARE NO COMPROMISE HIGH END AMPS VERY SIMILAR TO THOSE WE BUILT FOR HIFONICS, RODEK, AUTOTEK ETC. THEY ALL HAVE FULLY REGULATED POWER SUPPLIES AND USE EXOTIC CIRCUITRY FOR THE AUDIO AMPLIFIERS INCLUDING THE USE OF THE SUPER HIGH POWER TOSHIBA OUTPUT TRANSISTORS.
PLEASE NOTE THAT NEARLY ALL ARE IN THEIR ORIGINAL BOXES, BUT THE BOXES ARE NOT IN PRISTINE CONDITION. SOME DO NOT HAVE THE ORIGINAL MANUALS AND SO WE SUPPLY COPIES.
COMPANY MODEL PWR/CH 4ohm PWR/CH 2ohm QTY PRICE
USA 2075 75w x 2 100w x 2 0 $45 G
USA 2100 100w x 2 150w x 2 2 $55 G
USA 2150 150w x 2 250w x 2 0 $70 G
USA 2200 200w x 2 300w x 2 15 $99 G
USA 2200 200w x 2 300w x 2 12 $99 C
USA 2300 300w x 2 450w x 2 16 $139 G
USA 4050 50w x 4 75w x 4 7 $60 G
USA 4060 60w x 4 80w x 4 3 $63 G
USA 6300 50w x 4 75w x 4 3 $129 G 5ch AMP
+150w x 1 +250w x 1
G = GREY HEATSINK
C = CHROME HEATSINK
THE FOLLOWING SECTION – THE AMPLIFIERS ARE IN GIFT BOXES
USX 2050 50w x 2 75w x 2 4 $45
USX 2080 80w x 2 120w x 2 9 $55
USX 2150 150w x 2 250w x 2 35 $89
USX 4065 65w x 4 90w x 4 25 $80
USX 600F 200w x 2 300w x 2 28 $130
USX 800F 300w x 2 400w x 2 31 $158
USX 1000F 400w x 2 500w x 2 11 $195
IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL ME OR CALL AT THE ABOVE ADDRESS/PH #. MY OFFICE HOURS ARE 9.00 A.M. – 5.00 P.M. MONDAY – THURSDAY.
THE PREFERRED METHOD OF PAYMENT IS VIA MONEY ORDER. THIS ALLOWS US TO SHIP THE SAME DAY THE MO IS RECEIVED (EXCEPT FRIDAYS) CHEQUES MUST WAIT 14 DAYS TO CLEAR. SHIPPING IS VIA UPS GROUND UNLESS OTHERWISE SPECIFIED.
AMPLIFIER INFORMATION SECTION
* PLANET AUDIO 2 CHANNEL AMPS HAVE LOW AND HIGH PASS CROSSOVERS
* PLANET AUDIO 4 CHANNEL AMPLIFIERS HAVE LOW PASS AND FIXED 160Hz HIGH PASS CROSSOVERS.
* BOSS “CLR” 2 CHANNEL AMP HAVE LOW PASS X/OVER AND BASS + TREBLE CONTROLS
* BOSS “CLR” 4 CHANNEL AMPS HAVE THE SAME AS 2 CH BUT ON EACH PAIR OF CHANNELS
* BOSS 2 CH “CHAOS” AMPS HAVE LOW PASS X/OVER AND BASS BOOST AT 40Hz
* BOSS 4 CH “CHAOS” AMPS HAVE LOW PASS X/OVER
* BOSS 2 CH “HAVOC” AMPS HIGH AND LOW PASS X/OVERS, BASS + TREBLE
* BOSS 4 CH “HAVOC” AMPS HIGH AND LOW PASS X/OVERS, BASS
* USX 2 CH AMPS 2050,2080,2100 HAVE HIGH AND LOW PASS X/OVERS
* USX 2100, 2150, 600F, 800F, 1000F HAVE BASS BOOST
* USX2150, 600F, 800F,1000F HAVE LOW PASS CROSSOVER ONLY
• USX 4 CH AMPS HAVE LOW PASS ON EACH PAIR OF CH’s AND A MONO LOW PASS SIGNAL SECTION WITH LINE OUT.
• USA 2050-2150 HAVE LOW PASS CROSSOVER
• USA 2200/2300 HAVE LOW PASS X/OVER AND BASS BOOST
• USA 4050/4060 HAVE HIGH PASS CROSSOVERS x 2
• USA 4080 HAS 2 x HIGH PASS AND 1
#38
Registered User
Join Date: Jun 2002
Location: Central time zone
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Nice looking setup GixxerBB!
You can't take the back area out instead of drilling holes? Remember seeing a post where a guy says the cubby hole comes out by removing some screws.
How come you didn't drill the holes for the remote? Did you re-route the remote unit or are you not using it at all? Or is the remote just not necessary?
You can't take the back area out instead of drilling holes? Remember seeing a post where a guy says the cubby hole comes out by removing some screws.
How come you didn't drill the holes for the remote? Did you re-route the remote unit or are you not using it at all? Or is the remote just not necessary?
Originally posted by GixxerBB
Same screen most other people used.......the farenheit T-5801 i think...........no cutting of the nav necessary, it fits perfect.......only drilled holes in the back to get wires through.
Same screen most other people used.......the farenheit T-5801 i think...........no cutting of the nav necessary, it fits perfect.......only drilled holes in the back to get wires through.
#39
Registered User
Thread Starter
Join Date: Aug 2002
Location: CA
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
The Farenheit T-5801 was purchased from etronic.com, they definitely have the lowest price anywhere. As for the chubby hole, hmm........the whole piece including the double din area is all one piece and is removable by a few screws, but the nav hole itself cannot be remove from anything........and it's sealed. So the only way u can route wires through it is to drill a hole. I didn't have to make a circular cut like everyone else did for the remote sensor because I unsoldered the little remote piece and placed it somewhere between my two head unit. Makes for a good stealth install, and also eliminates the need to make that small hole. Hope this helps.
#40
Registered User
Join Date: Jun 2002
Location: Central time zone
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Good info! Just what I was looking for...especially the part about the remote.
Thanks
Thanks
Originally posted by GixxerBB
The Farenheit T-5801 was purchased from etronic.com, they definitely have the lowest price anywhere. As for the chubby hole, hmm........the whole piece including the double din area is all one piece and is removable by a few screws, but the nav hole itself cannot be remove from anything........and it's sealed. So the only way u can route wires through it is to drill a hole. I didn't have to make a circular cut like everyone else did for the remote sensor because I unsoldered the little remote piece and placed it somewhere between my two head unit. Makes for a good stealth install, and also eliminates the need to make that small hole. Hope this helps.
The Farenheit T-5801 was purchased from etronic.com, they definitely have the lowest price anywhere. As for the chubby hole, hmm........the whole piece including the double din area is all one piece and is removable by a few screws, but the nav hole itself cannot be remove from anything........and it's sealed. So the only way u can route wires through it is to drill a hole. I didn't have to make a circular cut like everyone else did for the remote sensor because I unsoldered the little remote piece and placed it somewhere between my two head unit. Makes for a good stealth install, and also eliminates the need to make that small hole. Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
Tochigi_236
Feedback & Suggestions for Our Forum
8
09-27-2015 03:40 PM