You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I need help finding some info on mounting a harness to the rear strut bar. I tried the search but didn't find anything??? Thanks in advance.
If I'm reading this right, I'm guessing you want to wrap your shoulder harnesses around the rear strut bar of the Z. If that's what you're describing, then I'd say it's a big no-no. I won't elaborate on it until you confirm that it's indeed what you're asking about.
bad idea on mounting harnesses on the rear strut tower. for low speed events without risk of rollover, use a harness bar. if you plan on circuit racing, i would advise a roll bar at minimum and mount the harnesses to the roll bar.
personally i don't like to use 4-pt harnesses without an anti-submarine strap.
are you running stock seats or aftermarket with harness pass through?
bad idea on mounting harnesses on the rear strut tower. for low speed events without risk of rollover, use a harness bar. if you plan on circuit racing, i would advise a roll bar at minimum and mount the harnesses to the roll bar.
For autocross i use the driver side child seat attachment point for my harness.
__________________
2010 Redline Time Attack Enthusiast RWD 3rd place Overall
bad idea on mounting harnesses on the rear strut tower. for low speed events without risk of rollover, use a harness bar. if you plan on circuit racing, i would advise a roll bar at minimum and mount the harnesses to the roll bar.
personally i don't like to use 4-pt harnesses without an anti-submarine strap.
are you running stock seats or aftermarket with harness pass through?
Need help with putting a harness to the rear srut bar
