$49.99 DIGITAL HID XENON KITS ALL SIZES AND COLORS 2 Year Warranty
08-05-2011, 10:52 AM
#102
Vendor - Former Vendor
Thread Starter
iTrader: (2)
Join Date: Aug 2010
Location: Long Island, NY
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
We are new vendors on my350z, but have been vendors of the best HID kits available on the market for the past 4 years. Our kits are fully digital and waterproof. They are error free with all German and luxury vehicles. For a limited time our kits are on sale for 49.99. We also offer phone support on all your installations. Please visit www.tspny.com to place your order.
These are TspNY Brand HID kits. They come with a true 2 year warranty. The kit comes with a warranty card and all kits are serial numbered. No fake "verbal warranties" here. I have all sizes and colors. Include 6000k, 8000k, 10000k, 12000k and 3000k yellow, Extreme Pink, Blue and Purple. These kits are error free and will not give any lamp out errors with German cars. All kits are in stock, special orders can be arranged. Kit details are as follows:
Features:
1. Strong and rapid startup
2. High brightness: can reach 3,600LM
3. Steady brightness
4. Good performance with high and low temperature resistance
www.tspny.com
Parameters:
1) Input voltage rage: DC 8-18V
2) Rated voltage: 13.5V
3) Max. start voltage: 23kV
4) Input current: 3.1A+/- 5%
5) Output power: 35W+/-2W
6) Luminosity: 3,600 lumens
7) Working temperature: -40 ~ +105°C
8) Color temperature: 4,300K - 12,000K or above
9) Life-span: 3,000 hours
10) Startup time: can reach 20% of the standard brightness within 1 second; can reach 80% of the standard brightness within 4 seconds
11) Auto cut-off: once there is a short circuit or open circuit, the ballast will
stop working automatically
12) Protection voltage: when the voltage exceed 19V, the ballast will stop working
automatically, and make the output power below 45W, to protect the ballast and
bulb from damage. When the voltage is 8V, the ballast still can work normally,
but when the voltage is below 7V, the ballast will stop working to protect the ballast
from damage
13) Reverse polarity protection: the ballast will stop working automatically when
a reverse polarity happens
14) Radiation:
Relative value: less than -70dB
Absolute value: less than 20mW for standard wireless interference
Relative value: less than -90dB
Absolute value: less than 5mW for our product
order your kits at www.tspny.com
Contact Info:
631-567-1444
EXTREME COLORS AVAILABLE AT NO EXTRA COST
Fully Digital Chrome Ballast
We have been in business for over 2 years and on other sites. We may be new here but we strive to give the best products with the best pricing and most importantly with the best customer service. Here is a link to our customer gallery on another site.
http://www.b20vtec.com/forums/....html
youtube videos of our kits fully underwater and being turned on and off, we dare any of our competitors to do the same.
These are TspNY Brand HID kits. They come with a true 2 year warranty. The kit comes with a warranty card and all kits are serial numbered. No fake "verbal warranties" here. I have all sizes and colors. Include 6000k, 8000k, 10000k, 12000k and 3000k yellow, Extreme Pink, Blue and Purple. These kits are error free and will not give any lamp out errors with German cars. All kits are in stock, special orders can be arranged. Kit details are as follows:
Features:
1. Strong and rapid startup
2. High brightness: can reach 3,600LM
3. Steady brightness
4. Good performance with high and low temperature resistance
www.tspny.com
Parameters:
1) Input voltage rage: DC 8-18V
2) Rated voltage: 13.5V
3) Max. start voltage: 23kV
4) Input current: 3.1A+/- 5%
5) Output power: 35W+/-2W
6) Luminosity: 3,600 lumens
7) Working temperature: -40 ~ +105°C
8) Color temperature: 4,300K - 12,000K or above
9) Life-span: 3,000 hours
10) Startup time: can reach 20% of the standard brightness within 1 second; can reach 80% of the standard brightness within 4 seconds
11) Auto cut-off: once there is a short circuit or open circuit, the ballast will
stop working automatically
12) Protection voltage: when the voltage exceed 19V, the ballast will stop working
automatically, and make the output power below 45W, to protect the ballast and
bulb from damage. When the voltage is 8V, the ballast still can work normally,
but when the voltage is below 7V, the ballast will stop working to protect the ballast
from damage
13) Reverse polarity protection: the ballast will stop working automatically when
a reverse polarity happens
14) Radiation:
Relative value: less than -70dB
Absolute value: less than 20mW for standard wireless interference
Relative value: less than -90dB
Absolute value: less than 5mW for our product
order your kits at www.tspny.com
Contact Info:
631-567-1444
EXTREME COLORS AVAILABLE AT NO EXTRA COST
Fully Digital Chrome Ballast
We have been in business for over 2 years and on other sites. We may be new here but we strive to give the best products with the best pricing and most importantly with the best customer service. Here is a link to our customer gallery on another site.
http://www.b20vtec.com/forums/....html
youtube videos of our kits fully underwater and being turned on and off, we dare any of our competitors to do the same.
08-15-2011, 07:10 AM
#107
Vendor - Former Vendor
Thread Starter
iTrader: (2)
Join Date: Aug 2010
Location: Long Island, NY
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
we are currently back ordered on the slim ballast, but may I suggest you get the regular ballast anyway as they are more durable for fog light application.
Thanks
TSPNY
08-16-2011, 07:12 PM
#109
Got mine today (regular ballast, 6000k) and they look much better than the ddm's I had in terms of build quality and even comes with mounting brackets which the ddm's did not. I also noticed how your bulb base is metal compared to the ddm's plastic/rubber base that never seated correctly so the hid bulb goes in just like the stock H7 bulb without any issues.
I got my passenger side installed tonight along with my new 03-05 oem headlight (deer accident)... I am waiting on a new drivers side headlight to finish the install.
Gonna have the body shop aim the headlights when they paint and install my new 06+ bumper.
I got my passenger side installed tonight along with my new 03-05 oem headlight (deer accident)... I am waiting on a new drivers side headlight to finish the install.
Gonna have the body shop aim the headlights when they paint and install my new 06+ bumper.
08-17-2011, 11:18 AM
#110
Vendor - Former Vendor
Thread Starter
iTrader: (2)
Join Date: Aug 2010
Location: Long Island, NY
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
Got mine today (regular ballast, 6000k) and they look much better than the ddm's I had in terms of build quality and even comes with mounting brackets which the ddm's did not. I also noticed how your bulb base is metal compared to the ddm's plastic/rubber base that never seated correctly so the hid bulb goes in just like the stock H7 bulb without any issues.
I got my passenger side installed tonight along with my new 03-05 oem headlight (deer accident)... I am waiting on a new drivers side headlight to finish the install.
Gonna have the body shop aim the headlights when they paint and install my new 06+ bumper.
I got my passenger side installed tonight along with my new 03-05 oem headlight (deer accident)... I am waiting on a new drivers side headlight to finish the install.
Gonna have the body shop aim the headlights when they paint and install my new 06+ bumper.
Thanks
TSPNY
08-31-2011, 03:00 PM
#117
really want to purchase a set but I have a question. I have an 07 with projector headlights and am a little hesitant of running aftermarket HID bulbs because I fear the light will be more scattered. This happened on my 02 maxima when I upgraded to 6k HIDs. Would the projectors with my car make this a non-issue?
Thanks. Also, please PM me a price for 6k bulbs shipped to 11364.
edit: Also PM'd ya
Thanks. Also, please PM me a price for 6k bulbs shipped to 11364.
edit: Also PM'd ya
Last edited by pbn85; 08-31-2011 at 03:13 PM.
08-31-2011, 04:45 PM
#118
Vendor - Former Vendor
Thread Starter
iTrader: (2)
Join Date: Aug 2010
Location: Long Island, NY
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
really want to purchase a set but I have a question. I have an 07 with projector headlights and am a little hesitant of running aftermarket HID bulbs because I fear the light will be more scattered. This happened on my 02 maxima when I upgraded to 6k HIDs. Would the projectors with my car make this a non-issue?
Thanks. Also, please PM me a price for 6k bulbs shipped to 11364.
edit: Also PM'd ya
Thanks. Also, please PM me a price for 6k bulbs shipped to 11364.
edit: Also PM'd ya
Thanks
TSPNY
09-08-2011, 12:40 PM
#119
Vendor - Former Vendor
Thread Starter
iTrader: (2)
Join Date: Aug 2010
Location: Long Island, NY
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
We are new vendors on my350z, but have been vendors of the best HID kits available on the market for the past 4 years. Our kits are fully digital and waterproof. They are error free with all German and luxury vehicles. For a limited time our kits are on sale for 49.99. We also offer phone support on all your installations. Please visit www.tspny.com to place your order.
These are TspNY Brand HID kits. They come with a true 2 year warranty. The kit comes with a warranty card and all kits are serial numbered. No fake "verbal warranties" here. I have all sizes and colors. Include 6000k, 8000k, 10000k, 12000k and 3000k yellow, Extreme Pink, Blue and Purple. These kits are error free and will not give any lamp out errors with German cars. All kits are in stock, special orders can be arranged. Kit details are as follows:
Features:
1. Strong and rapid startup
2. High brightness: can reach 3,600LM
3. Steady brightness
4. Good performance with high and low temperature resistance
www.tspny.com
Parameters:
1) Input voltage rage: DC 8-18V
2) Rated voltage: 13.5V
3) Max. start voltage: 23kV
4) Input current: 3.1A+/- 5%
5) Output power: 35W+/-2W
6) Luminosity: 3,600 lumens
7) Working temperature: -40 ~ +105°C
8) Color temperature: 4,300K - 12,000K or above
9) Life-span: 3,000 hours
10) Startup time: can reach 20% of the standard brightness within 1 second; can reach 80% of the standard brightness within 4 seconds
11) Auto cut-off: once there is a short circuit or open circuit, the ballast will
stop working automatically
12) Protection voltage: when the voltage exceed 19V, the ballast will stop working
automatically, and make the output power below 45W, to protect the ballast and
bulb from damage. When the voltage is 8V, the ballast still can work normally,
but when the voltage is below 7V, the ballast will stop working to protect the ballast
from damage
13) Reverse polarity protection: the ballast will stop working automatically when
a reverse polarity happens
14) Radiation:
Relative value: less than -70dB
Absolute value: less than 20mW for standard wireless interference
Relative value: less than -90dB
Absolute value: less than 5mW for our product
order your kits at www.tspny.com
Contact Info:
631-567-1444
EXTREME COLORS AVAILABLE AT NO EXTRA COST
Fully Digital Chrome Ballast
We have been in business for over 2 years and on other sites. We may be new here but we strive to give the best products with the best pricing and most importantly with the best customer service. Here is a link to our customer gallery on another site.
http://www.b20vtec.com/forums/....html
youtube videos of our kits fully underwater and being turned on and off, we dare any of our competitors to do the same.
These are TspNY Brand HID kits. They come with a true 2 year warranty. The kit comes with a warranty card and all kits are serial numbered. No fake "verbal warranties" here. I have all sizes and colors. Include 6000k, 8000k, 10000k, 12000k and 3000k yellow, Extreme Pink, Blue and Purple. These kits are error free and will not give any lamp out errors with German cars. All kits are in stock, special orders can be arranged. Kit details are as follows:
Features:
1. Strong and rapid startup
2. High brightness: can reach 3,600LM
3. Steady brightness
4. Good performance with high and low temperature resistance
www.tspny.com
Parameters:
1) Input voltage rage: DC 8-18V
2) Rated voltage: 13.5V
3) Max. start voltage: 23kV
4) Input current: 3.1A+/- 5%
5) Output power: 35W+/-2W
6) Luminosity: 3,600 lumens
7) Working temperature: -40 ~ +105°C
8) Color temperature: 4,300K - 12,000K or above
9) Life-span: 3,000 hours
10) Startup time: can reach 20% of the standard brightness within 1 second; can reach 80% of the standard brightness within 4 seconds
11) Auto cut-off: once there is a short circuit or open circuit, the ballast will
stop working automatically
12) Protection voltage: when the voltage exceed 19V, the ballast will stop working
automatically, and make the output power below 45W, to protect the ballast and
bulb from damage. When the voltage is 8V, the ballast still can work normally,
but when the voltage is below 7V, the ballast will stop working to protect the ballast
from damage
13) Reverse polarity protection: the ballast will stop working automatically when
a reverse polarity happens
14) Radiation:
Relative value: less than -70dB
Absolute value: less than 20mW for standard wireless interference
Relative value: less than -90dB
Absolute value: less than 5mW for our product
order your kits at www.tspny.com
Contact Info:
631-567-1444
EXTREME COLORS AVAILABLE AT NO EXTRA COST
Fully Digital Chrome Ballast
We have been in business for over 2 years and on other sites. We may be new here but we strive to give the best products with the best pricing and most importantly with the best customer service. Here is a link to our customer gallery on another site.
http://www.b20vtec.com/forums/....html
youtube videos of our kits fully underwater and being turned on and off, we dare any of our competitors to do the same.