FS: Vinyl car/roof/etc wrapping material - Blow out
12-13-2011, 10:48 AM
#1
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
FS: Vinyl car/roof/etc wrapping material - Blow out
I am going to be blowing out some over stocked vinyl that I have, to clear up my excess inventory a bit.
First up is my roll of satin black vinyl material. I either have enough for an entire car or I can split it up into smaller sections, based on whatever lengths you need.
Price will depend on the exact length you need. PM me the amount and I'll get you a price.
This is what satin black looks like:
I also have a roll of bright green vinyl, kind of like GT3RS green that I'll take pictures of when I get a chance.
In addition to the rolls above, I'll be discounting all of my matte black, gloss black, 3M 1080 gloss carbon fiber and 3M di-noc matte carbon fiber vinyl materials at 25% off of my regular prices.
Shoot me a PM or e-mail for questions/inquires.
thanks.
-Don
donathon@gmail.com
First up is my roll of satin black vinyl material. I either have enough for an entire car or I can split it up into smaller sections, based on whatever lengths you need.
Price will depend on the exact length you need. PM me the amount and I'll get you a price.
This is what satin black looks like:
I also have a roll of bright green vinyl, kind of like GT3RS green that I'll take pictures of when I get a chance.
In addition to the rolls above, I'll be discounting all of my matte black, gloss black, 3M 1080 gloss carbon fiber and 3M di-noc matte carbon fiber vinyl materials at 25% off of my regular prices.
Shoot me a PM or e-mail for questions/inquires.
thanks.
-Don
donathon@gmail.com
Last edited by Don Nguyen; 12-13-2011 at 12:46 PM.
12-13-2011, 12:44 PM
#2
20 percent of 25 percent? one of your links says 25 percent. I would like a quote for gloss black to wrap my z's roof, I also have the xm radio antenna thing, need to wrap that as well. Also, are you doing 25% off on installs as well? Or just the vinyl?
12-15-2011, 08:18 AM
#4
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
Just to give you guys an idea of pricing on the satin material. For a roof sized sheet, it'll be $20 + shipping.
Let me know if you guys have any questions or inquires. I will have the lowest prices anywhere for vinyl for the next couple of weeks.
Also, don't forget, in addition to roofs, I can also cut it up into strips and sell it to you to use on your window trims. Here are pictures of an Audi B7 that I vinyl wrapped the window trim in my matte black material to black out his chrome.
Before:
After:
-Don
donathon@gmail.com
Let me know if you guys have any questions or inquires. I will have the lowest prices anywhere for vinyl for the next couple of weeks.
Also, don't forget, in addition to roofs, I can also cut it up into strips and sell it to you to use on your window trims. Here are pictures of an Audi B7 that I vinyl wrapped the window trim in my matte black material to black out his chrome.
Before:
After:
-Don
donathon@gmail.com
12-16-2011, 07:15 AM
#5
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
For comparison sakes, here's pictures of gloss black on this white F10 550i BMW. Been starting to get more of these, as people start purchasing more of these cars. As you can see here, this is my gloss black vinyl material. If you want to go with as close as you can to a panoramic/glass/gloss black paint look, then this is your best option. Owner was around orange county and came out to me in Anaheim Hills to have the roof wrap done.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
12-16-2011, 10:35 AM
#6
Registered User
iTrader: (2)
Join Date: Sep 2011
Location: South san francisco
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Not to bash on don or anything but I'm just sharing my experience, I wasn't very satisfied with the vinyl quality, it was extremely flimsy and difficult to work with. I ended up throwing it away because it was just too hard to work with. Once again just sharing my experience, don is a great guy with very good customer service because he offered to ship me another one for cheaper.
Trending Topics
12-16-2011, 04:38 PM
#8
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
Not to bash on don or anything but I'm just sharing my experience, I wasn't very satisfied with the vinyl quality, it was extremely flimsy and difficult to work with. I ended up throwing it away because it was just too hard to work with. Once again just sharing my experience, don is a great guy with very good customer service because he offered to ship me another one for cheaper.
-Don
12-19-2011, 07:02 AM
#9
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
I've been getting a lot of people PMing me that they want the satin/matte finish, but those are two different finishes and I just wanted to post pictures of matte black in this thread to show the differences between the two.
So here is a white Subaru STI that I wrapped the roof in my matte black vinyl material.
-Don
donathon@gmail.com
So here is a white Subaru STI that I wrapped the roof in my matte black vinyl material.
-Don
donathon@gmail.com
12-19-2011, 05:57 PM
#10
Registered User
iTrader: (1)
Join Date: Dec 2008
Location: LA
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
wow 20 bucks for roof vinyl? Same price for gloss black as well? Please let me know. Oh, and I also have that antenna on my car as well. Just price for materials, not labor. Thanks.
12-19-2011, 06:20 PM
#11
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
Shoot me a PM for gloss black price, and if you want to pick it up or have me ship it and I'll give you a price for both.
thanks.
-Don
thanks.
-Don
12-21-2011, 08:24 AM
#16
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
PM sent.
I wanted to post some more pictures of satin black, since that's what this sale/thread is mainly for. I had to dig through some older pictures of guys that bought the satin black vinyl material from me and that DIYed it themselves. Here is a Mazda that bought some satin black vinyl material from me to do his roof with. His roof spoiler is CF, and I think his trunk was carbon fiber as well. It'll give you guys a better idea of how the satin black is in comparison to those pieces. Similar to the 350z in the original post with the satin black roof, the owner of this Mazda DIYed the roof install on his car with my satin black vinyl material.
Satin black:
-Don
Donathon@gmail.com
I wanted to post some more pictures of satin black, since that's what this sale/thread is mainly for. I had to dig through some older pictures of guys that bought the satin black vinyl material from me and that DIYed it themselves. Here is a Mazda that bought some satin black vinyl material from me to do his roof with. His roof spoiler is CF, and I think his trunk was carbon fiber as well. It'll give you guys a better idea of how the satin black is in comparison to those pieces. Similar to the 350z in the original post with the satin black roof, the owner of this Mazda DIYed the roof install on his car with my satin black vinyl material.
Satin black:
-Don
Donathon@gmail.com
12-23-2011, 07:30 AM
#17
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
Found some more pictures of my satin black material on the same 350z that's posted above in the original post. Not the best pictures in the world, but hopefully it'll still give you guys a better idea of the finish and how it looks on the car.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
