When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
These replace the stock Nissan diffuser that is required to use when you switch to the 350Z Nismo V3 OEM bumper. The stock plastic Nissan piece is over $500! OUCH!
No more huge gap under the front of your car and no more bumper flopping around in the wind! .
These are made of aluminum and are made to attach the front bumper back to the OE engine under panel, These will work with the stock plastic engine splash shield or the Zspeed engine splash shields.
If you are looking to upgrade to the Nismo V3 front bumper this makes it much cheaper!
Last edited by ZSpeedPerformance; 12-27-2018 at 05:10 AM.
Also do you guys also only sell the front smaller metal part to the under tray (where z speed was lasered in) separately? I hit something on the freeway and it snapped back half the front, so I tried banging it back straight, but it's very difficult to do.
Aluminum fender liners? Dam! You really have run out of things to by huh? Lolol
You're not understanding me... Notice the OEM/Non-Nismo V2 ZSpeed underpanel is just the center piece of the complete undertray. I'm referring to replacing the left & right plastic panels. Not the inner fender liners. However that would be nice as well.
The left and right panels are part of the fender liners. The ZSpeed engine shield replaces the entire stock engine shield.
Originally Posted by Robert_K
You're not understanding me... Notice the OEM/Non-Nismo V2 ZSpeed underpanel is just the center piece of the complete undertray. I'm referring to replacing the left & right plastic panels. Not the inner fender liners. However that would be nice as well.
Would like a quote on V3 front bumber w/ diffuser and undertray with hardware. (i have splash guards also)
Also would this include hardware to mount the bumper itself? thank you
PM Sent, Hardware to mount the bumper itself is not included, It is pretty basic hardware though and the stock stuff from your other bumper will work fine.
The left and right panels are part of the fender liners. The ZSpeed engine shield replaces the entire stock engine shield.
Well that answers my question. I'll go stfu than. Guess I need to consider replacing my inner fender liners with the '06's you have advertise. Any coupon codes for a repeat buyer? Have the underpanel for my '03 Z and my '12 G37S.