DIY: automatic side mirror folding

leeboyNY · 01-07-2007, 08:44 AM

I got a pair of JDM side mirrors. Then I transplanted JDM side mirror motor units to my side mirrors. I also got a relay that controls side mirrors. <- automobile DIY online shops sell these relays. When I turn the key, mirrors automatically open and mirrors close when the key is out. The relay also has a switch to open and fold mirrors on demand.

Relay wires:
Red wire: power
Blue wire: switch
Black: ground

JDM side mirrors have 5 wires:
Yellow, blue, purple wires: mirror movement control.
Pink and orange wires: folding motor control

HyperSprite · 01-07-2007, 06:12 PM

Very cool.

So where do we get the JDM mirrors?

Chris

leeboyNY · 01-07-2007, 06:51 PM

Quote:

Originally Posted by HyperSprite

Very cool.

So where do we get the JDM mirrors?

Chris

I got mine from the japanese Yahoo auction. It's pretty much the same deal as the ebay... I live in South Korea, so it was easier for me to get it..

rwalton1129 · 01-07-2007, 08:29 PM

How much for you to do a set...

leeboyNY · 01-07-2007, 08:43 PM

Quote:

Originally Posted by rwalton1129

How much for you to do a set...

About $300

reptile718 · 01-07-2007, 08:50 PM

Thats pretty cool, I will be on the look out for a set to experiment with.

philude · 01-07-2007, 09:25 PM

hmm, seems hard to find a set. def very interesting.

Barmats · 01-22-2007, 03:53 PM

That does look cool. What happens if someone tries to push the mirrors in by hand... will it damage the mechanism or will it just push inwards?

CEO350Z · 01-22-2007, 04:19 PM

+1, very cool indeed

jinsei888 · 02-01-2007, 03:08 PM

where does that switch go? is there an OEM location and template for it?

Fluid1 · 02-04-2007, 11:41 AM

My old lady's 05 Maxima has those, pretty cool.

Max_PSi · 02-04-2007, 01:29 PM

I did this option on my 95' 240SX. It was a pain to run the 2 extra wires I needed through the grommet to the mirrors, but other then that it was pretty straight foward. More then likely the current location of your power mirrors switch should be the same spot you mount this.

I do like the option of the mirror's opening and closing as you turn the car on and off. I don't have my mirrors setup like that and tend to drive through the parking lot a little bit b4 I notice. Whoops!

joekool · 02-07-2007, 09:12 AM

I'm in australia and we get the folding mirrors standard. however I've always wanted the mirrors to fold in and out automatically when the car is turned on/off etc... I'm having trouble understanding your writeup...

Is it possible to do a detailed step by step instructions + pics to do this mod??

Thanks.

z350boy · 02-15-2007, 08:54 PM

Quote:

Originally Posted by joekool

I'm in australia and we get the folding mirrors standard. however I've always wanted the mirrors to fold in and out automatically when the car is turned on/off etc... I'm having trouble understanding your writeup...

Is it possible to do a detailed step by step instructions + pics to do this mod??

Thanks.

Seems you would just have to run a wire from the mirror to a source that gets power when the ignition is activated.

z350boy · 02-15-2007, 09:10 PM

For $240 you can get a set of side view mirrors with the following fetaures:

(1) power folding side view mirror
(2) LED turn signal lights - flash when signal is activted ( a la MB)
(3) heated mirrors

Check this link:

http://www.xtralights.com/index.asp?...S&Category=341

shensuji · 02-15-2007, 10:34 PM

why did you solder wires to fuses?

Track · 02-21-2007, 03:15 PM

I want this option but do not want to do it myself, nor do I want a non-Z mirror. Is there any way I can buy this outright?

RBlover69 · 03-07-2007, 07:34 AM

a vendor here should pick this up i would buy this in a heart beat. I always wanted auto folding mirrors doesnt make sense why they werent on the Z over here.

bbs350z · 03-12-2007, 10:42 AM

jdm mirrors r the same as our factory mirrors right??

z350boy · 04-01-2007, 12:21 PM

Quote:

Originally Posted by drift_projekt_Z

jdm mirrors r the same as our factory mirrors right??

No they are not. The glass on USDM cars is the reverse of the JDM cars. That is the glass would have to be switched between USDM & JDM in order to keep the glass that usually says " Objects in the mirror are closer than they appear" on the correct side ( ie left side for Japan & right side for the US).

There is a company with a better solution. They are producing an electronic module that integrates into the wiring and will:
(1) have the mirrors tilt down when the reverse gear is engaged
(2) allow motorized folding
look for http://www.kptechnologies.com