FS: 350Z Footwell LED Kit! Single / Multi-Color Options!
#1
Nissan 350Z Footwell LED Kit! Single & Multi-Color Kits! Control W/Smartphone!
Nissan 350Z Footwell LED KIT
This kit is not just RGB, it is RGBW! That means there is an extra integrated LED chip that is specifically white in color, right next to the standard red, green, and blue LEDs. By using an RGBW controller, you can activate and control the white chip independently of the colors. This provides a much more uniform, pure, and bright white color than the traditional method of combining all RGB signals.
Our Bluetooth Controller will allow you to choose any color under the sun, including True White, directly from your phone! Our mobile app includes a wide variety of features including strobe and fade effects, preset colors, Camera Match, Music Sync, and much more. Our controller will also allow you to adjust the brightness of the LED strips. Any time you power up your strips, they will default to the last color that was previously selected.
These LED strips in this kit are highly flexible and waterproof. They feature high-density LEDs chips for brighter output and barrel-style M8 connectors for a secure connection.
Included in the 2-Piece Kit:
- Two (2) 50cm RGBW SMD30 Strips
- One (1) wiring harness (4-foot)
- Two (2) quick splices
- One (1) red LED toggle switch
- One (1) DC-to-DT adapter
- Four (4) zip-ties
- One (1) 3M outdoor adhesive pad
- Four (4) 50cm RGBW SMD30 Strips
- One (1) wiring harness (4-foot)
- Two (2) quick splices
- One (1) red LED toggle switch
- One (1) DC-to-DT adapter
- Eight (8) zip-ties
- Two (2) 3M outdoor adhesive pads
- Two (2) RGBW M8 extension wires
Watch the Install!
*PM us for the free-shipping code* (U.S. forum members only)
Collin O.
Diode Dynamics
Last edited by Diode Dynamics; 07-13-2021 at 12:22 PM.
#3
Thanks for your question! By using a SPDT switch instead of the SPST one that comes with the kit, you can essentially wire it up to both your dome lights and just have it on a switch. We recommend this change only by those with electrical experience, since you will need to locate the door or map light wire and run that wire to your new switch. Please see our diagram here- the actual wiring is quite simple BUT you need to be switching GROUND instead of power (wrong in diagram below). If you would like a SPDT switch instead of a SPST LED switch, please just let us know after checkout.
Or if you don't care about turning them on at-will, you can just wire the + and - directly to your dome light wiring and forego the switch altogether. Thanks!
Or if you don't care about turning them on at-will, you can just wire the + and - directly to your dome light wiring and forego the switch altogether. Thanks!
Last edited by Diode Dynamics; 06-11-2013 at 04:45 PM.
#4
New Member
iTrader: (1)
Just ordered a few things.
Was going to order the footwell lighting, but I'd like to know more about wiring to work possibly (off the opening of the door or switching on of the interior lights).
Was going to order the footwell lighting, but I'd like to know more about wiring to work possibly (off the opening of the door or switching on of the interior lights).
#5
It's a fairly simple and straightforward installation procedure and if you run into any difficulty you can always contact as for help, or watch our YouTube videos for guidance.
-Nick C.
#6
New Member
iTrader: (1)
It is certainly possible, however we typically recommend wiring it to the 12v power source for your cigarette lighter.
It's a fairly simple and straightforward installation procedure and if you run into any difficulty you can always contact as for help, or watch our YouTube videos for guidance.
-Nick C.
It's a fairly simple and straightforward installation procedure and if you run into any difficulty you can always contact as for help, or watch our YouTube videos for guidance.
-Nick C.
Amazing turn around, customer contact, and follow on. Kudos to you guys
Trending Topics
#9
You'd be looking at $29.99 plus $5 shipping for a blue kit:
http://www.diodedynamics.com/store/s...l-led-kit.html
Thanks!
Nick C
http://www.diodedynamics.com/store/s...l-led-kit.html
Thanks!
Nick C
#17
If you'd like to exchange yours for a multicolor kit, send an email to: contact@diodedynamics.com
We will get you taken care of
Thanks,
Nick C.
#18
New Member
iTrader: (20)
Join Date: Mar 2007
Location: Dallas
Posts: 781
Likes: 0
Received 0 Likes
on
0 Posts
The LED strips can be cut every 3 SMD chips to fit closer. Also, our RGB multicolor kits give you the ability to control the brightness via RGB controller.
If you'd like to exchange yours for a multicolor kit, send an email to: contact@diodedynamics.com
We will get you taken care of
Thanks,
Nick C.
If you'd like to exchange yours for a multicolor kit, send an email to: contact@diodedynamics.com
We will get you taken care of
Thanks,
Nick C.
I want to order the red color as well. Would you mind to ship them at once?
#20
Registered User
Join Date: Jul 2013
Location: doncaster uk
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
can you do the wifi unit colour changing kit so both footwells and say you can add as trip un the rear strut bar and behind the rear speakers so they all worked at the same time off one unit and if so how much would that kit be. or could you run two different wifi kits off the one app at the same time?