KW Hydraulic Lift System
#1
KW Hydraulic Lift System
http://www.kw-suspension.com/en/30_P..._HLS/index.php
Think: aragosta air cups.
http://www.kwsuspensions.de/HLS-Special/video.html
they're not out yet for any KW coilovers for the Z application....
KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm
The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
Version HLS 2
HLS 2 which enables only the front axles to be lifted and lowered
Version HLS 4
HLS 4 covers both the front and rear axles of the vehicle
- For vehicles with with little road clearance
- Vehicle specific applications
- Activation of change in height by a small keychain transmitter
avoiding the need to run additional wires through the vehicle
- Height changes can be done while the vehicle is moving, up to speeds of 50 mph
- Automatically lowering of the vehicle
- With TÜV certificate
- Rubber bellows protect hydraulic cylinder, thereby providing long term durability
The hydraulic cylinder unit is installed between the spring perch and spring. The pump unit is installed inside or near the spare wheel well. A programmable control unit processing the CAN Bus signal for speed control is also included in the kit.
HLS Kits are offered in 3 configurations:
1. HLS conversion kit with shorter springs to adapt to existing KW coilover
2. HLS conversion kit with lowering springs for OEM coilover kits.
3. Complete KW coilover kit with HLS adapted to it.
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm
The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
Version HLS 2
HLS 2 which enables only the front axles to be lifted and lowered
Version HLS 4
HLS 4 covers both the front and rear axles of the vehicle
- For vehicles with with little road clearance
- Vehicle specific applications
- Activation of change in height by a small keychain transmitter
avoiding the need to run additional wires through the vehicle
- Height changes can be done while the vehicle is moving, up to speeds of 50 mph
- Automatically lowering of the vehicle
- With TÜV certificate
- Rubber bellows protect hydraulic cylinder, thereby providing long term durability
The hydraulic cylinder unit is installed between the spring perch and spring. The pump unit is installed inside or near the spare wheel well. A programmable control unit processing the CAN Bus signal for speed control is also included in the kit.
HLS Kits are offered in 3 configurations:
1. HLS conversion kit with shorter springs to adapt to existing KW coilover
2. HLS conversion kit with lowering springs for OEM coilover kits.
3. Complete KW coilover kit with HLS adapted to it.
Think: aragosta air cups.
http://www.kwsuspensions.de/HLS-Special/video.html
they're not out yet for any KW coilovers for the Z application....
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Justin100
Intake Exhaust
26
11-29-2015 03:58 PM