stratxc

I have a S14 with front Brembo brakes and I have a 350Z that does not have brembos. I have searched and have only found the opposite of what I am trying to do, Z brembos on a 240. has anyone here done this swap or have any insight on how much of a pain it will be to swap over?

AdvanZ33

iTrader: (105)

I'm assuming the Brembos on the S14 are from another vehicle. Do you know which?

stratxc

I am sure they are from another vehicle. Unfortunately, I have no clue what car they came off of...

SamSpicer

iTrader: (1)

That'd be your first step on figuring out if you can put them on the Z. My bet is they are either Sentra SE-R's, STI, or Evo brembo's

terrasmak

iTrader: (8)

Rotor size , pictures and info is always good.

iideadeyeii

iTrader: (6)

Any other brakes could fit as long as the rotor thickness used is close to the stock oem brembo rotors. Just make a custom bracket. Very simple stuff

stratxc

I am trying to find a picture on the S14, the Z has the stock non-brembo brakes. Will post it soonest I get it, I am currently home for a funeral and the car is in Ohio where I am stationed. I don't see why I wouldn't be able to do it, if not I will just try and find Z Brembos. as for rotor size, I don't know the actual size, what I do know is, I have 18" wheels and there is a fraction of an inch clearance between the wheel and caliper.

stratxc

Here is a photo of the brake setup.

Canada_Z

Those look like Z Brembo's to me.