Need an opinion on lowering springs

WV350z · 08-28-2008, 05:46 PM

We'll im at the point where I want to lower my Z..but I have posted the 20" wheel question..im looking for a drop around .75"-1" drop or im gonna have to roll the rear fenders I do believe..Anyone have any advice?

thanks!

marques1 · 08-28-2008, 06:04 PM

you need to know your offsets. Your offsets on your wheels depend if you need to roll the fenders or not. So, what is your offset and wheel width?

plumpzz · 08-28-2008, 06:20 PM

RSR springs. Best springs evar for DD. They lower about an inch and are very streetable.

WV350z · 08-29-2008, 02:56 PM

i have a 20x9.5 in front and 20x10.5 with a 22MM offset all the way around.

marques1 · 08-29-2008, 04:43 PM

you should be find with any drop

i have the same thing but +15 and +22 offsets. i have tanabae gf210 springs and i think the it is lowered perfectly but you will need a rear camber kit for this setup because it drops your car over an inch.

08-28-2008, 05:46 PM	#1
WV350z Registered User Join Date: Apr 2007 Location: Charleston,West Virginia Posts: 189 iTrader: (1)	Need an opinion on lowering springs We'll im at the point where I want to lower my Z..but I have posted the 20" wheel question..im looking for a drop around .75"-1" drop or im gonna have to roll the rear fenders I do believe..Anyone have any advice? thanks!

08-28-2008, 06:20 PM	#3
plumpzz Registered User Join Date: May 2005 Location: Jersey, New Posts: 6,400 iTrader: (7)	RSR springs. Best springs evar for DD. They lower about an inch and are very streetable. __________________ b00ger

08-28-2008, 06:04 PM	#2
marques1 Registered User Join Date: Jun 2006 Location: austin, texas Posts: 2,293 iTrader: (4)	you need to know your offsets. Your offsets on your wheels depend if you need to roll the fenders or not. So, what is your offset and wheel width?

08-29-2008, 02:56 PM	#4
WV350z Registered User Join Date: Apr 2007 Location: Charleston,West Virginia Posts: 189 iTrader: (1)	i have a 20x9.5 in front and 20x10.5 with a 22MM offset all the way around.

08-29-2008, 04:43 PM	#5
marques1 Registered User Join Date: Jun 2006 Location: austin, texas Posts: 2,293 iTrader: (4)	you should be find with any drop i have the same thing but +15 and +22 offsets. i have tanabae gf210 springs and i think the it is lowered perfectly but you will need a rear camber kit for this setup because it drops your car over an inch.