FS: Wilwood 6piston/4piston BBK
#1
Wilwood 6piston/4piston BBK
SOLD
Hello guys, I have a BBK for sale that I bought from another member on here a few months ago. Since it's started to warm up, I decided to finally install it. Turns out that it needs a rebuild. I went a little shop happy over the winter so I decided it would be a better decision to sell these to make up for other purchases then spending a couple hundred more to fix them.
The kit is 6 piston front calipers and 4 piston rear calipers. 14in front rotors and 13in rear rotors. The rotors have plenty of life in them and the rear pads do as well. All wilwood brand. The fronts only have a few thousand more miles on them, so before I installed them I bought new front pads. However I never switched out the new pads because I realized it needed a rebuild. I will include them though. They are BP-20's by wilwood. The kit also has stainless steel brake lines.
I'd like to get 1000 picked up or 1100 shipped to the 48. They're big and heavy so shipping's expensive. Oh, and they're blue. Thanks!
Hello guys, I have a BBK for sale that I bought from another member on here a few months ago. Since it's started to warm up, I decided to finally install it. Turns out that it needs a rebuild. I went a little shop happy over the winter so I decided it would be a better decision to sell these to make up for other purchases then spending a couple hundred more to fix them.
The kit is 6 piston front calipers and 4 piston rear calipers. 14in front rotors and 13in rear rotors. The rotors have plenty of life in them and the rear pads do as well. All wilwood brand. The fronts only have a few thousand more miles on them, so before I installed them I bought new front pads. However I never switched out the new pads because I realized it needed a rebuild. I will include them though. They are BP-20's by wilwood. The kit also has stainless steel brake lines.
I'd like to get 1000 picked up or 1100 shipped to the 48. They're big and heavy so shipping's expensive. Oh, and they're blue. Thanks!
Last edited by CleanFairladyZ; 03-02-2014 at 12:32 PM.
Trending Topics
#8
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
About $10 per piston that needs replacement and $15 per caliper for seals. Stupid cheap to fix , all parts are available from Todd at TCE http://www.tceperformanceproducts.com/service-parts/
#9
Registered User
iTrader: (1)
Join Date: Apr 2013
Location: California
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Terrasmak for the answer, saw that site earlier and glad they have all the parts individually for replacement. Guess I'm in line if its still up for grabs
About $10 per piston that needs replacement and $15 per caliper for seals. Stupid cheap to fix , all parts are available from Todd at TCE http://www.tceperformanceproducts.com/service-parts/
Last edited by fzero; 03-02-2014 at 05:08 AM.
Thread
Thread Starter
Forum
Replies
Last Post
seagrasser
Zs & Gs For Sale
6
10-11-2015 03:27 PM