Nissan 350Z Discussion forums, Photo Gallery and more...

Go Back   MY350Z.COM Forums > General > Motorsports > Drag

Reply
 
Thread Tools
Old 05-30-2008, 04:56 PM   #1
Registered User
 
24v GTI Guy's Avatar
 
Join Date: Mar 2003
Location: Pasadena, CA
Posts: 80
iTrader: (1)
1st time to the track in my G35

I have a 05 (Rev-up) G35 coupe and finally got the track a lil while ago for the first time in this car. My mods are in my sig below. With everything done to my car it seemed like my car was running much slower than it should have been. I understand that i was still learning the car and was lucky enough to get about 15 runs in but even my MPH was low and closer to that of what a bone stock G35 runs.
There was another guy with his 350z there and he was running almost identical ET's and MPH. Since i dont have a scanner i will just type out my 2 best time slips for your review.

2rd: 1st: Highest MPH run

60': 2.287 2.271 2.480

330': 6.187 6.167 6.391

1/8: 9.354 9.327 9.526

MPH: 78.02 79.25 79.10

1000' 12.037 12.003 12.240

1/4: 14.290 14.257 14.489

MPH: 100.85 100.91 101.12
__________________
2005 G35 Coupe 6MT- JWT Pop Charger, UR Underdrive Pulleys, Crawford Headers, Fast Intentions Resonated Testpipes, HKS Hi Power Exhaust, Clutchmasters Stg 3 Clutch/Flywheel, 3.91 FD Gears, Tein Basic Coilovers, Volk SF Winning 19/8.5 F 19/10.5 R Future mods: MRev 2, 5/16 spacer, Utec,

Last edited by 24v GTI Guy; 05-30-2008 at 05:00 PM.
24v GTI Guy is offline   Reply With Quote
Old 05-30-2008, 05:02 PM   #2
Registered User
 
24v GTI Guy's Avatar
 
Join Date: Mar 2003
Location: Pasadena, CA
Posts: 80
iTrader: (1)
Also, the track I ran at was at Silver Dollar Raceway in Reynolds Ga.
__________________
2005 G35 Coupe 6MT- JWT Pop Charger, UR Underdrive Pulleys, Crawford Headers, Fast Intentions Resonated Testpipes, HKS Hi Power Exhaust, Clutchmasters Stg 3 Clutch/Flywheel, 3.91 FD Gears, Tein Basic Coilovers, Volk SF Winning 19/8.5 F 19/10.5 R Future mods: MRev 2, 5/16 spacer, Utec,
24v GTI Guy is offline   Reply With Quote
Old 05-30-2008, 11:59 PM   #3
Registered User
 
Join Date: Jun 2004
Location: Baltimore, MD
Posts: 26,913
iTrader: (0)
The car is running OK picking up 20 MPH in the second 660 feet. The problem is 60 foot times. Run a 2.0 second 60 foot time and you will be running better than 14.0 seconds.

15 runs may be a lot of practice for one day, but it may also be a disadvantage. As you are working to improve your technique run after run, the motor is getting hotter and hotter. Hot lapping a car is exciting, but degrades performance.
__________________
350Z 2004 Enthusiast: K&N Typhoon Air Intake - Motordyne Plenum Spacer - Alphawerks Stainless Steel Headers - Helix SS Test Pipes - Injen Super SES Cat-Back Exhaust System - 6 Pad Puck Ceramic Clutch and Forged Steel Flywheel by Competition Clutch - WedsSport SA-70
davidv is online now   Reply With Quote
Old 06-02-2008, 07:52 PM   #4
Registered User
 
24v GTI Guy's Avatar
 
Join Date: Mar 2003
Location: Pasadena, CA
Posts: 80
iTrader: (1)
but that MPH is what stock non rev-up G35s are laying down, not full bolt-on Rev-up cars.
__________________
2005 G35 Coupe 6MT- JWT Pop Charger, UR Underdrive Pulleys, Crawford Headers, Fast Intentions Resonated Testpipes, HKS Hi Power Exhaust, Clutchmasters Stg 3 Clutch/Flywheel, 3.91 FD Gears, Tein Basic Coilovers, Volk SF Winning 19/8.5 F 19/10.5 R Future mods: MRev 2, 5/16 spacer, Utec,
24v GTI Guy is offline   Reply With Quote
Old 06-02-2008, 08:57 PM   #5
Registered User
 
Join Date: Jun 2004
Location: Baltimore, MD
Posts: 26,913
iTrader: (0)
Quote:
Originally Posted by 24v GTI Guy
but that MPH is what stock non rev-up G35s are laying down, not full bolt-on Rev-up cars.
Of course quarter mile trap speed can be improved. It begins with a better one eighth mile trap: 80 or 81 MPH. But you cannot get to that speed with 2.2 second 60 foot times.
__________________
350Z 2004 Enthusiast: K&N Typhoon Air Intake - Motordyne Plenum Spacer - Alphawerks Stainless Steel Headers - Helix SS Test Pipes - Injen Super SES Cat-Back Exhaust System - 6 Pad Puck Ceramic Clutch and Forged Steel Flywheel by Competition Clutch - WedsSport SA-70
davidv is online now   Reply With Quote
Reply



Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off
Forum Jump


All times are GMT -8. The time now is 04:43 AM.


Advertise on MY350Z.COM - Terms of Service - Privacy Policy - Jobs


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
Copyright ©2002 - 2008, MY350Z.COM All Rights Reserved.