wheel an tire choose for drag racing with brembo
#1
wheel an tire choose for drag racing with brembo
right now i am running 300zx tt 16x8.5 rims in the rear with P295/50R16 (28'' x 11.5'' - 16'' rear an was running a 18x10.5 with a 285 rs3 in the front bad choose. need a safe front. hate the speed wobble. caught the wall yesterday at 120. so want a safe tire for the front.
also anyone that knows a lot about setup. i don't run a rear sway-bar because of autocross. will that be part of my problem.
also anyone that knows a lot about setup. i don't run a rear sway-bar because of autocross. will that be part of my problem.
#7
New Member
iTrader: (23)
With out the Sway Bar up front, you will get the car drifting left to right at high speed.
But also sounds like you may have something is out of wack with you setup.
Also, for the 1/4 drag strip it's best not to mix Radials and Bias Tires, some cars work ok mixing but not all.....
More info about you car?, setup? daily Driver? Drag Car?
How long have you been drag racing? Runs on car?
But also sounds like you may have something is out of wack with you setup.
Also, for the 1/4 drag strip it's best not to mix Radials and Bias Tires, some cars work ok mixing but not all.....
More info about you car?, setup? daily Driver? Drag Car?
How long have you been drag racing? Runs on car?
Last edited by OldManZ350; 04-25-2015 at 11:15 PM.
Trending Topics
#8
With out the Sway Bar up front, you will get the car drifting left to right at high speed.
.... i dont have the rear sway bar on. took it of for autox. will be putting it back on.
But also sounds like you may have something is out of wack with you setup.
Also, for the 1/4 drag strip it's best not to mix Radials and Bias Tires, some cars work ok mixing but not all.....
......yes i just ordered to 17in stock spare rims to put drag tires on the front.
More info about you car?, setup? daily Driver? Drag Car?
.....no its not daily driven. might see 2k a year. i use it for every thing. autox track days an drag. Current:
Front..
Camber: -3.1
Toe: 0 out right now will be changing this to. 1/16 out soon.
Caster: 9.3
Rear:
Camber: -2.0
Toe: 0 toe in
link with info on my build.
https://my350z.com/forum/media-share...ild-gtm-4.html
How long have you been drag racing? Runs on car?
3 runs on the track very twitch handling. even cruising on the streets.
.... i dont have the rear sway bar on. took it of for autox. will be putting it back on.
But also sounds like you may have something is out of wack with you setup.
Also, for the 1/4 drag strip it's best not to mix Radials and Bias Tires, some cars work ok mixing but not all.....
......yes i just ordered to 17in stock spare rims to put drag tires on the front.
More info about you car?, setup? daily Driver? Drag Car?
.....no its not daily driven. might see 2k a year. i use it for every thing. autox track days an drag. Current:
Front..
Camber: -3.1
Toe: 0 out right now will be changing this to. 1/16 out soon.
Caster: 9.3
Rear:
Camber: -2.0
Toe: 0 toe in
link with info on my build.
https://my350z.com/forum/media-share...ild-gtm-4.html
How long have you been drag racing? Runs on car?
3 runs on the track very twitch handling. even cruising on the streets.
#9
New Member
iTrader: (23)
At what point did the drivability go out the door? Before or After you modified the Suspension?
Make sure you get a Radial Front Tires.
After you reinstall rear sway bar and test drive, report back.
I see in your thread that you have totally redone your suspension. IMO, If the car does not drive right after reinstalling the rear sway bar, you have likely screwed something up.
Make sure you get a Radial Front Tires.
After you reinstall rear sway bar and test drive, report back.
I see in your thread that you have totally redone your suspension. IMO, If the car does not drive right after reinstalling the rear sway bar, you have likely screwed something up.
Last edited by OldManZ350; 04-26-2015 at 07:01 AM.
Thread
Thread Starter
Forum
Replies
Last Post
350Z_Al
Exterior & Interior
133
10-29-2020 07:44 PM