You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Good luck with finding a production 350Z with a QR front bumper. You might be thinking of the clamshell type fastners that are used on GT cars. My GT3 spec 350Z uses a full fiberglass body with a front bumper that not only slides on 1" brackets, but also uses those side fastners to hold each side up. That piece would be difficult, if not impossible, to fit to a production 350Z.
^^ yeah im sure your right......but im thinking some external style latches on the sides and then something under the hood holding the center i would bet??
- J
__________________
04 PPW Touring - My favorite mod is my short Dodge Avenger antenna
See its more like pictured below.....i keep doing stuff like this to my front bumpers...so I'm looking to make a quick release system to swap between good bumper and drift day bumper....
The one pictured below will be my drift day bumper.....
-J
__________________
04 PPW Touring - My favorite mod is my short Dodge Avenger antenna
i saw a guy with an integra with something like this (made for a honda). all he had to do was unlatch the sides and unscrew four or six screws under then hood and the bumper would pop right off.
See its more like pictured below.....i keep doing stuff like this to my front bumpers...so I'm looking to make a quick release system to swap between good bumper and drift day bumper....
The one pictured below will be my drift day bumper.....
i imagine that quick release takes place of the 2 factory screws that are there.
and there are 6 tabs under the hood. i can take off my bumper in 1 minute with hand tools.
i saw a guy with an integra with something like this (made for a honda). all he had to do was unlatch the sides and unscrew four or six screws under then hood and the bumper would pop right off.
hope this helps
Quote:
Originally Posted by JasonZ-YA
yes! i want to do this - circled area!!
anyone have any pics of what exactly they did to do this? latches they used and where they bought them? etc?
i saw a guy with an integra with something like this (made for a honda). all he had to do was unlatch the sides and unscrew four or six screws under then hood and the bumper would pop right off.
hope this helps
That would work....
__________________ << TRACK HEADLIGHT COVERS >>
Thanks to teh Sponsors : Corner3 Garage, RHD Japan, APP, Goliath Construction
That would be pretty sweet if you could have it recessed in like the picture they have on the site (pic below). If applied on top of the bumper and fender (not frenched in) it probably wouldn't look great but it would still serve your function needs.
__________________ 2004.5 PPW 350z - iForged Sprints 20x9.5/20x11 w/ 275/295 | Tein Coilovers | V2 Front/Sides/Chargespeed replica CF rear - SOON TO BE FOR SALE1992 Full Size Chevy Blazer - DIY Desert Tan paintjob | 6" Superlift w/33 MT's
REMOVABLE FRONT BUMPER - QUICK RELEASE STYLE?
