str8dum1

iTrader: (11)

i have an aeromotive a1000-6 FPR laying around I am not using if interested. Listed in classifieds under engine.

terrasmak

iTrader: (8)

Got all the parts except for the FPR now, the wiring to the fuel pump has been run (jegs electric water pump harness $25 ) Soon i will have the final part and finally get this project finished up. Once it is proven i will post a full parts listing,, final price is looking like around $450 , much cheaper than the Radium http://www.radiumauto.com/ that would have cost me $830 not including hoses, fitting and filters.

mw9

iTrader: (51)

Can't wait to see final project

terrasmak

iTrader: (8)

This went cold for a long time. Picking up a few minor needed parts and building it as a return system.

Was doing some reading on the factory basket modification. If leaving the OEM pump in, do I need to do with the OEM regulator?

Most people just build return systems, not a return to a surge with its own separate fuel pump.

terrasmak

iTrader: (8)

Just move this over to the section where more people have experience with fuel mods.

Also deciding if I want to keep the 255 pump I have or get something different. When complete , min HP will be 450 and up to 500 on the high side. I expect it will be on the lower side of things.