next upgrade on my Z HELP!!!
#1
Registered User
Thread Starter
Join Date: Jul 2012
Location: Ga
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
next upgrade on my Z HELP!!!
Hello everyone ,
I have a 2003 350z and planning on going SC in the next year when I finish paying her off ( Wow Finally ) , with that being said , all the modifications I have done up till now , will benefit me once I go SC. Now what should I do next ?!?! , my modifications are as followed. CAI , Kinetixs V+ , DC Sport headers , 2.5'' Z1 test pipes , custom 2.5'' Y to 3'' single out ( VIbrant Muffler and resonator ) , Light weight pulley set and UpRev ( tuned by john at z1) also getting re-tuned in the next two weeks. I do not need to worry about fuel delivery because the SC kit will come with injectors and fuel pump. What should my next step be ?
any advise or even just your two cents will be GREAT !! Thanks
I have a 2003 350z and planning on going SC in the next year when I finish paying her off ( Wow Finally ) , with that being said , all the modifications I have done up till now , will benefit me once I go SC. Now what should I do next ?!?! , my modifications are as followed. CAI , Kinetixs V+ , DC Sport headers , 2.5'' Z1 test pipes , custom 2.5'' Y to 3'' single out ( VIbrant Muffler and resonator ) , Light weight pulley set and UpRev ( tuned by john at z1) also getting re-tuned in the next two weeks. I do not need to worry about fuel delivery because the SC kit will come with injectors and fuel pump. What should my next step be ?
any advise or even just your two cents will be GREAT !! Thanks
#3
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
cooling mods and a diff.
#5
Registered User
Thread Starter
Join Date: Jul 2012
Location: Ga
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Advise not sarcasm cux350z lol , as far as cooling goes I may do the pathfinder cooling mod and mishimoto radiator , the vq loves to breath and I was looking at the mrev2 , that plus my V+ plenum I believe would be more efficient then the kinetx s velocity. ?
#6
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
The VQ also likes to overheat with forced induction, spin tires wildly and fry stock clutches when an extra 150hp is added.
Trending Topics
#8
Registered User
Thread Starter
Join Date: Jul 2012
Location: Ga
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info , good point , overheating the vq is one of my biggest worries , the pathfinder cooling mod has shown to be pretty effective in help keeping the ECT down under hard driving ( at least from what my research has shown me ) illl start there and then go with the an aluminum radiator mishimoto or koyo
#14
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Slam it wit offsets
#16
でたらめ検出器
iTrader: (1)
First step should be to get rid of that light weight crank pulley. It isn't harmonically dampened and can potentially damage your motor, especially when boosted. The stock pulley, ATI, and Fluidampr pulleys are the only crank pulleys available for the VQ that are dampened.
Next, get an oil cooler and an aftermarket radiator. Based on terrasmak's review, I'd go with the Mizu radiator over the Mishimoto.
BTW... Is your trans a 6MT or 5AT?
Next, get an oil cooler and an aftermarket radiator. Based on terrasmak's review, I'd go with the Mizu radiator over the Mishimoto.
BTW... Is your trans a 6MT or 5AT?
Last edited by RudeG_v2.0; 09-07-2012 at 12:05 PM.
#17
Registered User
iTrader: (3)
Join Date: Apr 2012
Location: coachella, california
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
Hello everyone ,
I have a 2003 350z and planning on going SC in the next year when I finish paying her off ( Wow Finally ) , with that being said , all the modifications I have done up till now , will benefit me once I go SC. Now what should I do next ?!?! , my modifications are as followed. CAI , Kinetixs V+ , DC Sport headers , 2.5'' Z1 test pipes , custom 2.5'' Y to 3'' single out ( VIbrant Muffler and resonator ) , Light weight pulley set and UpRev ( tuned by john at z1) also getting re-tuned in the next two weeks. I do not need to worry about fuel delivery because the SC kit will come with injectors and fuel pump. What should my next step be ?
any advise or even just your two cents will be GREAT !! Thanks
I have a 2003 350z and planning on going SC in the next year when I finish paying her off ( Wow Finally ) , with that being said , all the modifications I have done up till now , will benefit me once I go SC. Now what should I do next ?!?! , my modifications are as followed. CAI , Kinetixs V+ , DC Sport headers , 2.5'' Z1 test pipes , custom 2.5'' Y to 3'' single out ( VIbrant Muffler and resonator ) , Light weight pulley set and UpRev ( tuned by john at z1) also getting re-tuned in the next two weeks. I do not need to worry about fuel delivery because the SC kit will come with injectors and fuel pump. What should my next step be ?
any advise or even just your two cents will be GREAT !! Thanks
Thread
Thread Starter
Forum
Replies
Last Post