Notices
Engine & Drivetrain VQ Power and Delivery

Sourcing a new engine

Thread Tools
 
Search this Thread
 
Old 04-03-2014, 03:06 PM
  #1  
robsilver350
Registered User
Thread Starter
iTrader: (2)
 
robsilver350's Avatar
 
Join Date: Mar 2009
Location: Austin, TX
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default Sourcing a new engine

I've been looking at LKQ as the place to get a new engine for my 2003 MT. Going through their inventory, there are different engine dates (e.g. thru 09/2003, thru 10/2004, from 11/2004), but does anyone know if it matters as long as it's before 10/2004 since I assume from 11/2004 is the uprev DE engine?

Also, can a previously AT engine be used in my MT?
Old 04-04-2014, 03:47 AM
  #2  
Conway_160
New Member
iTrader: (1)
 
Conway_160's Avatar
 
Join Date: Dec 2012
Location: Pan Handle
Posts: 2,559
Received 341 Likes on 280 Posts
Default

Well I have an 04 G35 6MT that has a new'ish motor from a AT 03 350Z. As long as you don't get a revup motor you'll be fine.
Old 04-04-2014, 04:33 AM
  #3  
myfirstzcar
Registered User
 
myfirstzcar's Avatar
 
Join Date: Jan 2010
Location: western New York
Posts: 611
Received 1 Like on 1 Post
Default

Check the build date of the car to be sure, it's on the driver's door.
Old 04-04-2014, 06:32 AM
  #4  
rich2342
New Member
iTrader: (3)
 
rich2342's Avatar
 
Join Date: Dec 2008
Location: Mass
Posts: 1,539
Received 7 Likes on 7 Posts
Default

What's the price range for one of these going? Mine is burning oil. Nice to know for future reference
Old 04-04-2014, 06:53 AM
  #5  
Conway_160
New Member
iTrader: (1)
 
Conway_160's Avatar
 
Join Date: Dec 2012
Location: Pan Handle
Posts: 2,559
Received 341 Likes on 280 Posts
Default

I think the one I got cost them like $800.
Old 04-13-2014, 09:16 AM
  #6  
robsilver350
Registered User
Thread Starter
iTrader: (2)
 
robsilver350's Avatar
 
Join Date: Mar 2009
Location: Austin, TX
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by rich2342
What's the price range for one of these going? Mine is burning oil. Nice to know for future reference
From what I've found so far the used DE engines (and you have to be careful because some are just the core, some are long block, and some are full assembly) range from 1000 to 2000 depending on miles.

Ask if they have compression test results and walk if they don't. Even though they will say that they have a warranty on parts, they will not reimburse for labor. So let's say you buy a motor with no comp test for 1500, have someone with heavy lifiting equipment swap it for 1000, and upon install find it has a busted cylinder; you'll end up getting your 1500 back on the motor, but you're out the 1000 on labor to your mechanic.
Old 04-23-2014, 02:51 PM
  #7  
robsilver350
Registered User
Thread Starter
iTrader: (2)
 
robsilver350's Avatar
 
Join Date: Mar 2009
Location: Austin, TX
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default

Can anyone tell if this is a nonrev engine?

https://www.iaai.com/Vehicles/Vehicl...adRecent=True#
Old 04-23-2014, 03:47 PM
  #8  
dcains
Registered User
iTrader: (15)
 
dcains's Avatar
 
Join Date: Aug 2009
Location: Lutz, FL
Posts: 5,126
Received 435 Likes on 342 Posts
Default

The RevUp motor came only in the '05 6MT Anniversary and the '06 6MT (any trim).
Old 04-23-2014, 04:05 PM
  #9  
dizenman
Registered User
iTrader: (7)
 
dizenman's Avatar
 
Join Date: Jan 2011
Location: corona, ca
Posts: 313
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by robsilver350
Can anyone tell if this is a nonrev engine?

https://www.iaai.com/Vehicles/Vehicl...adRecent=True#
Thats from an auto so it is a DE
Old 04-23-2014, 06:19 PM
  #10  
robsilver350
Registered User
Thread Starter
iTrader: (2)
 
robsilver350's Avatar
 
Join Date: Mar 2009
Location: Austin, TX
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks! "New" engine found and on its way
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lapham3
Maintenance & Repair
8
10-07-2022 03:15 PM
liqalu04
Engine & Drivetrain
31
01-02-2022 12:58 PM
3vilbunny
Exterior & Interior
24
07-18-2017 05:10 PM
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM
Fixxxercask
Engine
6
11-09-2015 11:10 AM



Quick Reply: Sourcing a new engine



All times are GMT -8. The time now is 07:47 PM.