Auto trans to manual trans?
#22
Registered User
Thread Starter
Join Date: Apr 2013
Location: Atlanta
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
#25
Registered User
Thread Starter
Join Date: Apr 2013
Location: Atlanta
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
#26
Registered User
Thread Starter
Join Date: Apr 2013
Location: Atlanta
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, for sure. Unfortunately I do a lot of highway driving because I live on campus 120 miles round trip from home. I'll take a look at it this weekend and hopefully be able to confirm that it's a 4.08 differential causing the high rpms and not a bigger issue!
#28
Registered User
Join Date: Sep 2011
Location: Philadelphia, PA
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
The fourth letter "A" does not mean auto, it means the engine type.
http://nissanhelp.com/diy/common/nissan_vin.php
The vin will not tell you whether the car is a manual or auto. Only way to truly tell what came out of the factory would be to look up your vin at a dealer.
http://nissanhelp.com/diy/common/nissan_vin.php
The vin will not tell you whether the car is a manual or auto. Only way to truly tell what came out of the factory would be to look up your vin at a dealer.
Last edited by Suwaidi; 04-08-2014 at 06:50 PM.
#29
Registered User
iTrader: (1)
Join Date: Jul 2012
Location: way down in the valley
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
The fourth letter "A" does not mean auto, it means the engine type.
http://nissanhelp.com/diy/common/nissan_vin.php
The vin will not tell you whether the car is a manual or auto. Only way to truly tell what came out of the factory would be to look up your vin at a dealer.
http://nissanhelp.com/diy/common/nissan_vin.php
The vin will not tell you whether the car is a manual or auto. Only way to truly tell what came out of the factory would be to look up your vin at a dealer.
I've checked many 4.5-6s and I see the A...the single vtc hump and know there's no cd009
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM