Need Help With Finding Gauge Sensor Adapters
#1
Registered User
Thread Starter
iTrader: (8)
Join Date: Mar 2012
Location: Alexander City, AL
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Need Help With Finding Gauge Sensor Adapters
I need:
3/8" bsp x 1/8" pt reducer bushing
To mount an oil temp sensor in the top of my aps oil pan where the second turbo oil return would've been.
And
3/8" pt x 1/8" pt reducer bushing
To mount a new water temp sensor in the extra bung of my pathfinder rear coolant pipe.
Thanks for any help. I've already googled it and searched locally.
This is what it should look like, I just can't find the right size.
3/8" bsp x 1/8" pt reducer bushing
To mount an oil temp sensor in the top of my aps oil pan where the second turbo oil return would've been.
And
3/8" pt x 1/8" pt reducer bushing
To mount a new water temp sensor in the extra bung of my pathfinder rear coolant pipe.
Thanks for any help. I've already googled it and searched locally.
This is what it should look like, I just can't find the right size.
#3
Registered User
I assume you need an NPT fitting for the second one. Lowes or Home Depot likely has that. McMaster-Carr carries a variety of them, in various materials and pressure ratings. Here's one in brass for low pressure:
4429K471 (Search mcmaster.com for that part number)
If you want to see all of them, just search for reducing bushings and use the parametric search from there.
For your other fitting, I couldn't find any single fitting, but if you have room, you can these:
4860K143 (that's a 3/8 BSPT Male x 3/8 NPT Female) + 4429K471 (Same 3/8 NPT x 1/8 NPT bushing as above).
Hope this helps.
4429K471 (Search mcmaster.com for that part number)
If you want to see all of them, just search for reducing bushings and use the parametric search from there.
For your other fitting, I couldn't find any single fitting, but if you have room, you can these:
4860K143 (that's a 3/8 BSPT Male x 3/8 NPT Female) + 4429K471 (Same 3/8 NPT x 1/8 NPT bushing as above).
Hope this helps.
Last edited by patrickoneal; 10-11-2014 at 11:14 AM.
Thread
Thread Starter
Forum
Replies
Last Post