sledneck__11

just finished getting my jim wolf clutch and flywheel installed ever since it been done,after driving for a bit the clutch looses it firmness and last quarter inch to half inch clutch pedal doesnt fully return. It worked fine before the new clutch and i have tried to bleed the line once or twice any got any tips or guess's thanks again everyone

travlee

iTrader: (8)

change master and slave cylinders

/thread

guitman32

iTrader: (15)

How about trying a clutch pedal adjustment via the master cylinder pushrod as a last ditch before hastily replacing things.

travlee

iTrader: (8)

if he went oem he could get the parts for $150

sledneck__11

Just seems weird it was fine before the new clutch, new clutch goes in it starts happening instantly, i have tryed to get the air out twice it seems to help but then after 20 mins of driving it looses firmness again. Clutch pedal is within spec mb ill suck it in the quarter inch i have trouble with and call it good for now

travlee

iTrader: (8)

have you changed the fluid?

sledneck__11

I have added fluid twice after trying to get the air out mb i will swap it out completely

travlee

iTrader: (8)

swap it completely and if issue remains, i would replace the master and slave

terrasmak

iTrader: (8)

Rebuild the master and save , it's $40 in parts , very simple.