DIY - Quaife LSD INSTALL - PICS!
#81
Registered User
Join Date: Apr 2013
Location: Perth, Western Australia
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Cheers.
Last edited by BlaqMagic; 07-19-2013 at 07:48 AM.
#82
Registered User
Join Date: Jul 2008
Location: Moncton, NB Canada
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
I bought a stock LSD and want to install this in my base open diff. I am pretty sure I have a good handle on everthing exept the side flanges or axle stubs that go into the diff housing.
Are they different between the open diff and the LSD?
Are they different between the open diff and the LSD?
#84
Registered User
iTrader: (1)
Join Date: Jun 2004
Location: US
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
is this part number a kit for the whole diff or do i need (2) of these, one for each side?
are there any seals that need replacing at the drive shaft and axles?
should i go with OEM ring bolts or just go to home depot for something of the same spec? what grade?
if i mark my original ring, will i still need to worry about adjusting backlash? i still need to read up on what the heck backlash is but it is a big unknown that is making this install sound a bit more complicated
thanks!
are there any seals that need replacing at the drive shaft and axles?
should i go with OEM ring bolts or just go to home depot for something of the same spec? what grade?
if i mark my original ring, will i still need to worry about adjusting backlash? i still need to read up on what the heck backlash is but it is a big unknown that is making this install sound a bit more complicated
thanks!
#85
Registered User
when you guys did your diff installs did you mark the bearing caps in their correct locations? it says to do that but when I did mine I didn't mark so I just slid the diff back in , seems to turn fine , do you guys think this will be a problem and if so how can I fix it if I never marked them when I pull the diff out , to know where to put them back in.
Thread
Thread Starter
Forum
Replies
Last Post
350Z_Al
Exterior & Interior
133
10-29-2020 07:44 PM