FS: Fully Built & Blue Printed VQ35DE Long Block " ZERO MILES"... Updated
10-13-2014, 11:38 AM
#1
Fully Built & Blue Printed VQ35DE Long Block " ZERO MILES"... Updated
Well, here it is folk! It as a hard decision to make.My loss is someone else's gain. Here is my fully built VQ35 engine. Built/Blue printed by Ron Bergenholtz of Bergnholtz Racing.You can spot him working with Team Nitto in Formula D... This package offerson the VQ35 Long Block is good for someone who wants to push the limits .The motor is spec'ed to suport/ handle and is good up to 850-900Rwhp(With added L19 Head Studs).
Spec's:
Arias Extreme Pistons .020 over
Eagle Rods
ARP Rod Bolts, Heads
ARP L19 Head Studs
Block inspected and cleaned
Block redecked
Block modified for better cooling with HR Headgaskets
Block Bored and Honed using a Torque Plate
Rotating assembly balanced
Crank magnafluxed and the journals micro-polished
New ACL Race Spec main bearings installed
New ACL Race Spec rod bearings installed
Block assembled and Blue Printed By Bergenholtz Racing
New OEM HR Head Gaskets
Heads inspected and cleaned
Heads redecked
JWT S2, Upgraded Cams
New OEM Valve stem seals installed
Valve Stem Heights set
Cold Clearance set for cams
Heads assembled
New OEM Rev-up Oil Pump
Price: $8,500.00 obo plus shipping paid by BUYER
Location: Houston, TX
For faster contact? email me at ewilliams0013@gmail.com or PM Me
Shipping/Freight and Paypal fee's paid for by buyer
The following photos are from the start of the engine build, till completed. You can also see the same photos on my Instagram at NSR_G35.
Spec's:
Arias Extreme Pistons .020 over
Eagle Rods
ARP Rod Bolts, Heads
ARP L19 Head Studs
Block inspected and cleaned
Block redecked
Block modified for better cooling with HR Headgaskets
Block Bored and Honed using a Torque Plate
Rotating assembly balanced
Crank magnafluxed and the journals micro-polished
New ACL Race Spec main bearings installed
New ACL Race Spec rod bearings installed
Block assembled and Blue Printed By Bergenholtz Racing
New OEM HR Head Gaskets
Heads inspected and cleaned
Heads redecked
JWT S2, Upgraded Cams
New OEM Valve stem seals installed
Valve Stem Heights set
Cold Clearance set for cams
Heads assembled
New OEM Rev-up Oil Pump
Price: $8,500.00 obo plus shipping paid by BUYER
Location: Houston, TX
For faster contact? email me at ewilliams0013@gmail.com or PM Me
Shipping/Freight and Paypal fee's paid for by buyer
The following photos are from the start of the engine build, till completed. You can also see the same photos on my Instagram at NSR_G35.
Last edited by NorthSideRacing; 08-16-2015 at 08:44 AM.
11-16-2014, 08:40 AM
#5
350Z-holic
iTrader: (13)
11-18-2014, 06:59 PM
#7
PM me an offer for just the bottom end. If the offer is good? Then we might be able to work something out. Or just make me an offer for the complete long block 
Nope! With legal documents, signed and notarized. Buyer doesn't receive the motor till balance is paid-off. Just trying to help out, because I know some can't fork out 10k just like that. Doesn't sound too crazy.
Nope! With legal documents, signed and notarized. Buyer doesn't receive the motor till balance is paid-off. Just trying to help out, because I know some can't fork out 10k just like that. Doesn't sound too crazy.
