When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello everyone.
I am selling a used UTEC that I purchased to use along with my Vortech V3 Supercharger kit. However the tuner I want to tune my car only works with Uprev so unless I want to do the tuning myself I have to sell the utec and just get the uprev.
It comes with the map switch and serial cable. If you don't have a computer with a serial port you can just get a usb to serial adapter for $8 from amazon and you'll be ready to go. I have tested it with an adapter and it works just fine. (the usb cable included is not really used for anything. The UTEC has a usb port but I don't believe it was ever made to work to program it through that port so you have to use the serial cable)
Sorry for the upside-down picture.
The full manual can be found online with a simple google search or if you want I can print it for you and include in the box.
just a heads up you can use the usb to program it no problem no serial adapter needed.
I did not know that, I thought they never got the usb port working and it had to be programmed only through the serial. This makes it much easier for sure. Thanks for the info.
damn, good price, and it comes with a base tune right?
I can flash any of the base tunes from TurboXS or I can include my Vortech v3 tune on it for someone with a supercharger setup with 550cc injectors and a 2.87 pulley.
03-18-2015, 09:27 PM
TurboXS UTEC
