KEY!S Racing Steering Wheel?

ReV2Red · 11-20-2009, 06:22 PM

Is anyone running a key's racing wheel and have some pics of it installed?

Also, will the wheel fit directly where the original sat or does the Z need a hub adapter?

Z1 Performance · 11-20-2009, 07:06 PM

every aftermarket wheel needs a hub adapter

ReV2Red · 11-20-2009, 07:13 PM

Ok. Is there a particular type we need? I don't want a quick release or folding, or any of that jazz.

Z1 Performance · 11-20-2009, 09:00 PM

we use this one exclusively:

http://www.z1auto.com/prodmore.asp?m...or&prodid=1264

ReV2Red · 11-21-2009, 05:52 AM

Ok. Can you still use the short type without using a rapfix. I'm looking at getting the semi dished wheel. It gives an offset of about 50mm.

Bump for any pics of a KEY!S wheel in a Z.

Z1 Performance · 11-21-2009, 06:25 AM

you will need:

http://www.z1auto.com/prodmore.asp?m...or&prodid=4395

ReV2Red · 11-21-2009, 12:08 PM

I suppose by the time i've used the short hub and then the adapter it wont be far off just using the regular hub adapter anyway.

Z1 Performance · 11-21-2009, 01:48 PM

the short hub + adapter is still shorter than the std hub

ReV2Red · 11-23-2009, 05:54 AM

No one has this wheel in there car?

Citrus · 11-23-2009, 09:17 AM

Most "JDM" dish and semi-dish style wheels are made by ATC and then covered in Company XYZ fabric + logo. I almost bought the Key!s racing wheel, but ended up going with a G Corporation 350mm, 90mm dish instead.

Pics in the link below including a comparison of stock wheel depth and quick release, short hub, & dish wheel depth:

http://my350z.com/forum/body-interio...stall-diy.html

rrmedicx · 12-09-2009, 08:10 AM

Here ya go:

Advice. Get the short hub. I didn't and now I have to stretch my fingers to turn on the blinker or wipers. But otherwise love the 330mm smaller steering wheel. Feel is greatly improved and turning is easier.

ReV2Red · 12-09-2009, 08:56 AM

Looks awesome. Is that the flat one, or the semi-dished one?
Also, have you gone with the standard hub adapter and a quick disconnect?

rrmedicx · 12-09-2009, 09:00 AM

Not 100% sure, but if I had to guess I'd say flat. I'd have to see both versions to note the difference.

Z1 Performance · 12-10-2009, 04:21 PM

it's the flat one

_Sloopez_ · 12-10-2009, 08:03 PM

350 deep corn.... will be in the car soon...

Mike@Blackline · 12-12-2009, 02:37 PM

what an odd name....key!s

Waizzz · 12-12-2009, 03:54 PM

Quote:

Originally Posted by Mike@Blackline

what an odd name....key!s

+1

Not a fan of the logo at the top of the wheel, but a pretty cool design otherwise.

Michla22 · 12-12-2009, 11:17 PM

*KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S**KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S**KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S**KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S**KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S**KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S**KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S**KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S**KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S**KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S**KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S**KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S* *KEY!S*

Didn't they make one that had that all over the wheel like crazy?