sundevil67

Anyone have any experience with this product?

The idea is to tow a trailer like this

I know it will look ridiculous, but it is the most cost effective way for me to get my bike from A to B right now. I don't want to get rid of my Z just yet, and definitely can't afford to insure a second vehicle/truck...nor do I have the space for it.

There has to be someone out there that has done this, since they make this hitch especially for the 350Z, and it has been on sale for a while now.

Anyone have any experiences to share? Is it a decent quality hitch? Any recommendations for other hitch/trailer combinations?

Thanks!

terrasmak

iTrader: (8)

That should/would work fine, both would.

What kind of bike, how heavy? The hitch does bolt to the aluminum bumper beam, keep the trailer/bike light and your good.

scotts300

iTrader: (46)

They work well - I have a similar one.

davidv

iTrader: (2)

Surprised you would ask such a question. Several members have a hitch for tires and autocross. Recommendations in the autocross forum.

sundevil67

It is for a WR-250 dirtbike...thanks for the replies

winchman

Where did the green Z come from? It actually looks pretty good.

scotts300

iTrader: (46)

Thanks. I posted it so that he could see that I - as well as many others - use a trailer hitch for one reason or another. I use a bike rack on mine, and strap two wheels (with tires) to it when I have a passenger headed to the track for a track day. Otherwise I just put all 4 in the car.

str8dum1

iTrader: (11)

i pull my trailer with drag wheels , jack and tools to the strip weekly. no problems with that hitch.

when I pull the bumper for a repaint, i will probably plate weld another piece of aluminum bar at the mount point to beef it up.

stein

iTrader: (3)

I've got something similar, it's one that comes in two pieces and you can't see it when the low piece isn't attached. I need to remove it and sell it since I don't need it anymore.

N80

I know, old thread. But I'm looking for a hitch for my 2007 Enthusiast so I can tow tires and tools to track events. The Curt hitch would be great but I've done a lot of searches and cannot find a hitch for the 2007 model. Not by Curt or anyone else. Anyone know what is different about the rear bumper in the 07 that these hitches aren't made for it?

Anyone modify one of the Curt hitches (or anything else) to get a hitch on an 07?

Hoserz

Scott, I've been trying to find a hitch for my '03 Track model, but have been unsuccessful. Do you know if the Curt #11483 would fit? Thanks, Paul

travlee

iTrader: (8)

this is a year old dead thread, their are hitches available for the z from jasonzya on this forum, below is his website for them.

http://350zhatchshocksandmore.com/Hidden_Hitch.htm

AllstarE4

iTrader: (5)

I just installed a Jason Z-YA hitch the other day. I chose it because I wanted to be able to remove the lower part of the hitch and leave the top half hidden when not in use.

I first tried the Curt hitch and it would have required me to cut a square notch in my bumper so I took it right back off. It also would have always been visible as it's all one piece.

npr350z

iTrader: (1)

just gona subscribe to this...

tkels78

anyone have any issues with the hitch and going over speed bumps?

fastnascar17

i know this is an old thread. I just joined the page. Recently purchased a 2003 350z touring. Looking at getting a hitch put on the z to pull my tire trailer to and from autocross events. What hitch did you use and did you have to cut into the bumper at all? I'm trying to avoid cutting the bumper as i just purchased a new one.

Z-YU-L8R

do you mind sending me the link(s) of where you got the parts for the removable hitch?

travlee

iTrader: (8)

i havent seen Jason on here in a while... not even sure he is still making these

http://www.350zhatchshocksandmore.com/Hidden_Hitch.htm