Rear wiper delete---Password JDM
#1
Registered User
Thread Starter
iTrader: (11)
Join Date: Aug 2012
Location: In the Woods...NY
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Rear wiper delete---Password JDM
Just a quick heads up to anyone looking to do this mod----The Password JDM wiper delete plug for hondas fits our rear wiper very well. Its alittle pricey at 20 bucks but its nice powdercoated aluminum, available in alot of colors and will last. It uses an o-ring seal instead of using rtv goop slopped all over to seal. I originally used the cheap lowes plug that i painted but was having paint adhesion issues so i just sprung for this plug.
Fits right in----all you need to do is grind off the small aluminum tab on the side that cant bee seen after install. Overall im very happy for the 20 bucks.
Fits right in----all you need to do is grind off the small aluminum tab on the side that cant bee seen after install. Overall im very happy for the 20 bucks.
Trending Topics
#10
New Member
iTrader: (3)
Just a quick heads up to anyone looking to do this mod----The Password JDM wiper delete plug for hondas fits our rear wiper very well. Its alittle pricey at 20 bucks but its nice powdercoated aluminum, available in alot of colors and will last. It uses an o-ring seal instead of using rtv goop slopped all over to seal. I originally used the cheap lowes plug that i painted but was having paint adhesion issues so i just sprung for this plug.
Fits right in----all you need to do is grind off the small aluminum tab on the side that cant bee seen after install. Overall im very happy for the 20 bucks.
Fits right in----all you need to do is grind off the small aluminum tab on the side that cant bee seen after install. Overall im very happy for the 20 bucks.
#12
Registered User
these still the best option? Looks like they are $30 each now
I went to home depot to look at plugs and couldnt find one in 7/8, i guess 1" works or maybe just order this bish
http://www.ebay.com/itm/Password-JDM-Rear-Wiper-Blade-Arm-Delete-Kit-V2-Honda-Acura-Gunmetal-/261108231872?pt=Motors_Car_Truck_Parts_Accessories&hash=item3ccb436ec0&vxp=mtr
I went to home depot to look at plugs and couldnt find one in 7/8, i guess 1" works or maybe just order this bish
http://www.ebay.com/itm/Password-JDM-Rear-Wiper-Blade-Arm-Delete-Kit-V2-Honda-Acura-Gunmetal-/261108231872?pt=Motors_Car_Truck_Parts_Accessories&hash=item3ccb436ec0&vxp=mtr
#14
6 inch cawk is my fave!
iTrader: (3)
What should I use to cover the wiper hole in my carbon fiber hatch? I was pretty unhappy seeing that damn hole.. At least the emblem holes are not their. The stock gasket for the wiper doesn't even fit tightly.. Im thinking of just fiberglass on the bottom then flush the top and putting a piece of something around it. But any suggestions ill consider. Dont want water and would be happy if its flush.
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM