Apr drag wing
#1
Registered User
Thread Starter
Join Date: Jul 2014
Location: Minnesota
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Apr drag wing
Can anyone please tell me what is the name of this spoiler. This thing is kick ***.
See attachment below
See attachment below
Last edited by SR71; 02-21-2015 at 11:34 AM. Reason: Title updated
#4
General & DIY Moderator
MY350Z.COM
MY350Z.COM
iTrader: (64)
Ugh- that APR wing is non-functional in terms of adding drag to the Z at all legal speeds. It also doesn't provide any appreciable downforce until speeds reach over 90 MPH. That's a performance quotient that makes no sense for the cost.
#5
Registered User
Thread Starter
Join Date: Jul 2014
Location: Minnesota
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
I'm not buying it for the down force or anything like that, I just like the looks of it, I was thinking about the nismo spoiler but those are just too common, so im going down a different path. I try finding this spoiler but can't find it, is it the APR cts 200?
#6
Registered User
Join Date: Jul 2014
Location: brooklyn
Posts: 1,144
Likes: 0
Received 0 Likes
on
0 Posts
#16
Registered User
Thread Starter
Join Date: Jul 2014
Location: Minnesota
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Apr drag wing
Hello Everyone..
So I just got done installing a APR GTC 200 drag wing on my car. The thing is, it sort of vibrate and wobble a little at 70+ mph....is it suppose to do this?
Here's a pic of my beast so far..
So I just got done installing a APR GTC 200 drag wing on my car. The thing is, it sort of vibrate and wobble a little at 70+ mph....is it suppose to do this?
Here's a pic of my beast so far..
#17
Registered User
iTrader: (1)
I had a really cheap one do this on a different car. I was under the impression it only did it cause it was made with cheap plastic, a friend put it on once I took it off and it eventually ripped off from the braces.
Put it wobbled quite a bit like a thin piece of cardboard would it you attached it to your trunk lol.
Maybe they all shake a tiny bit.. but I'd keep your eye on it and if it starts to crack around the mounting holes I'd get a stronger one cause eventually it will fly off if you don't keep an eye on it
Put it wobbled quite a bit like a thin piece of cardboard would it you attached it to your trunk lol.
Maybe they all shake a tiny bit.. but I'd keep your eye on it and if it starts to crack around the mounting holes I'd get a stronger one cause eventually it will fly off if you don't keep an eye on it
#18
New Member
I had a really cheap one do this on a different car. I was under the impression it only did it cause it was made with cheap plastic, a friend put it on once I took it off and it eventually ripped off from the braces.
Put it wobbled quite a bit like a thin piece of cardboard would it you attached it to your trunk lol.
Maybe they all shake a tiny bit.. but I'd keep your eye on it and if it starts to crack around the mounting holes I'd get a stronger one cause eventually it will fly off if you don't keep an eye on it
Put it wobbled quite a bit like a thin piece of cardboard would it you attached it to your trunk lol.
Maybe they all shake a tiny bit.. but I'd keep your eye on it and if it starts to crack around the mounting holes I'd get a stronger one cause eventually it will fly off if you don't keep an eye on it
#19
New Member
iTrader: (13)
I like that APR wing and v3 front, but not with the mods you have going on. The wheel choice, yellow headlight paint, "jdm" decal, Dodge SRT gold stripes on the fender don't flow together at all. GT wings belong on cars with a track/functional look and this just doesn't work.
#20
Registered User
Thread Starter
Join Date: Jul 2014
Location: Minnesota
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
I like that APR wing and v3 front, but not with the mods you have going on. The wheel choice, yellow headlight paint, "jdm" decal, Dodge SRT gold stripes on the fender don't flow together at all. GT wings belong on cars with a track/functional look and this just doesn't work.
Last edited by joonvang; 02-18-2015 at 03:10 AM.