Momo steering wheel help!!!
#1
Registered User
Thread Starter
Join Date: Jul 2014
Location: Minnesota
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Momo steering wheel help!!!
Hello everyone,
I just got done installing my momo steering wheel, at first the horn work but now it doesnt and the airbag light keeps flashing even though I used the two resistor that came with the nrg short hub. Any clue on how to fix these two problems? I already try resetting it with the key method but it doesn't work. Parts used are listed below
2008 nissan 350z grand Touring
Momo steering wheel
Nrg short hub with two resistors
Nrg quick release version 2.8
I just got done installing my momo steering wheel, at first the horn work but now it doesnt and the airbag light keeps flashing even though I used the two resistor that came with the nrg short hub. Any clue on how to fix these two problems? I already try resetting it with the key method but it doesn't work. Parts used are listed below
2008 nissan 350z grand Touring
Momo steering wheel
Nrg short hub with two resistors
Nrg quick release version 2.8
#4
Registered User
Thread Starter
Join Date: Jul 2014
Location: Minnesota
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
You probably just need to re-perform the airbag reset procedure. Can be tricky to get right.
I try three times already but I'll keep on trying.
Did you use the grounding ring provided to get ground to the horn button? Your ground probably just came loose or you blew a fuse. Tell us how you wired the horn.
I try three times already but I'll keep on trying.
Did you use the grounding ring provided to get ground to the horn button? Your ground probably just came loose or you blew a fuse. Tell us how you wired the horn.
I don't think I blew the fuse because when I click the lock button on my remote the horn still sound of
Last edited by SR71; 07-31-2015 at 09:32 PM. Reason: Learn to multi-quote
The following users liked this post:
terrasmak (07-31-2015)
#6
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Trending Topics
#9
Registered User
#10
Registered User
Thread Starter
Join Date: Jul 2014
Location: Minnesota
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know the torque spec to the nut that goes on after the hub? For some reason, turning feels alot stiffer than when I had the stock steering on.