HRMoneyPit

Your going to need a way bigger wheel for the flares. Your going to need some custom built wheels as you can fit 11s with a real tires all day on stock body

terrasmak

iTrader: (8)

https://my350z.com/forum/nismo-350z/...lin-da-19.html I would PM him, can't find the overfender He runs , but they are nice

jdmfetish

iTrader: (3)

how much money do you have to spend on a new wide body kit

Dekker001

I have about 5K for body, wheels and tires. I can recoupe 1K from the existing kit and other stuff I have laying around.

I have another 5K set aside for the "future" , but I can dip into that if I need. I'm not paying any labor on the respray, and we already have the paint.

350Z_Al

Just do it! It's not that bad, just take your time. 8/10 wide body guys hack their fenders under the flares, take your time and do it right.

It sounds like you've got the facilities and skill (with your body guy and shop) to get the project done.

Check out my build thread, in my sig below. I posted up a ton of pics of my fender flare install, fender modification, etc.

jdmfetish

iTrader: (3)

this kit is nice I like it

https://my350z.com/forum/exterior/60...aftsquare.html

but you need to up the budget

jdmfetish

iTrader: (3)

http://www.stardast.jp/product/z33newparts

this kit is 500000 yen = $4500 USD new
the new over fenders
the front / side steps / rear wing in CF

http://www.stardast.jp/product/z33newparts

plus shipping

a bit less if you opted for FRP instead of CF

jdmfetish

iTrader: (3)

http://www.greddy.com/products/aerod...er:model:350Z/

$3960

jdmfetish

iTrader: (3)

http://jdmflares.com/NISSAN_350Z_RB_FLARES.html

cheapest option here

if it was me I would just fix your car , V2 or V3 front rep they make good ones, new mirror, side steps , rear spats or diffuser , rep V2 or V3 Wing

new wheel and tires

front fender

call it a day

WPPJR30

iTrader: (27)

My $.02… Forget all the replica and crap parts (wheels and aero) and save your money a little longer and buy legit parts and do the job right. If you want to do a widebody properly, you are going to need more than $5,000. Don't cut corners. It will not look right and, in the end, there will still be much to be desired. Again, my humble opinion. It will not be shared by many around here…

iideadeyeii

iTrader: (6)

You say you already bought the kit yet post pictures you found online of the kit.

Dekker001

So pictures of the pieces lay on the shop floor would be better? I don't get your point.....

jdmfetish

iTrader: (3)

he feels you don't have the kit

bubbleteaZ

Ebay is selling a rocket bunny 350z kit that came out a couple months ago. I Suggest that or the superleggera kit. those are both really nice ones. they both retail for replica kits about for 1,500 orn 1,800 thats what i would do if i was you.

Dekker001

OK, I'm glad I posted this!!! It seemed like a good idea at the time, but I think I am going to have to pass on the widebody for now. The flares JDMFETISH posted could be added later, and I think the WB is just too much for my first attempt at this.

I really like the AMS-GT rear, but I still am unclear as to what to use on the front. Anyone have any suggestions? I like the front bumpers that have a lip built into the design (aesthetics, not downforce), but I am open to any ideas. BTW, I don't like the Vader style because of all the holes in the face...

jdmfetish

iTrader: (3)

http://www.shineautoproject.com/port...z-spec-nv1nv2/

shine makes a nice V2 front with built in lip , and you can get the lip CF with bumper frp

https://my350z.com/forum/body-exteri...er-thread.html

V3 bumper

Dekker001

There....

dboyzalter

iTrader: (3)

Yeah check out Als build thread... Makes it look worth it, doesn't make it look possible for $5000 though haha

rustyschopshop

I am not a fan of the kit but if it fits your personality I wish you much luck while attempting to get it finished. Will be awaiting update pics as you go. I enjoy people having fun with their cars wether my flavor or not.

jdmfetish

iTrader: (3)

if someone was going to front on having a kit
it would not be that kit