You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Recently all free time has been spent prepping our 350z for the NOPI/NHRA season, including changes as drastic as a motor swap thanks to a 4.0L maximum displacement rule. After spending last weekend in our rig in Atlanta thanks to constant rain, we were finally able to make a couple passes at Moroso this weekend. After qualifying was over in a class of all Supras and us, we were sitting in the #1 position with a 8.99 @ 155mph. Sunday when eliminations came our crank sensor decided to give up and we didn't make the call. There is much more left in the car, and we are eager to see what it will do at the next race in NJ.
1.445 60' on MT DOT drag radials and weighed in at 3400 pounds after the pass
To get the car to hook on these tires we set the Haltech boost-by-front-wheelspeed to ramp in more boost once we got out of the gate
Our setup:
IP 4.0L VQ and IP Stage5 Heads
L19 Head studs, BC Stage3 Cams (272) & Valvetrain
Haltech Platinum PNP EMS
Garrett GT47R turbo @ 30psi
Powerglide, DSS Axles
Random info: The Haltech datalog of front wheel speed shows our Z ran 0-60 in 2.05 seconds
__________________ Phone: 859.230.9027. We are a performance parts distributor, with services including
dyno tuning, high performance engine building, and turn-key packages from 400-1000+whp Like us on Facebook for shop news and sales!
Outstanding achievement! Would love to see more pics of the new set up, including the dyno graph and/or in-car video!!! How much power did it take to run 8s? The world wants to know - ha ha.
rcdash - Same setup, just a .2L smaller motor. I forgot to mention, we are using the Cosworth Intake Plenum now. As far as HP, I am not sure. I broke the motor in on the dyno and tuned it to ~700whp at low boost. Then we left for the track where I turned it up. I am curious myself as to what it is putting down in current form - we will find out before long. I had incar rolling, but the camera strap was in front of it
__________________ Phone: 859.230.9027. We are a performance parts distributor, with services including
dyno tuning, high performance engine building, and turn-key packages from 400-1000+whp Like us on Facebook for shop news and sales!
Outstanding achievement! Would love to see more pics of the new set up, including the dyno graph and/or in-car video!!! How much power did it take to run 8s? The world wants to know - ha ha.
Injected Performance 350z .. 8sec 1/4mile VIDEO!
How much power did it take to run 8s? The world wants to know - ha ha.
//Cowboys 2012 Superbowl Champs//Phoenix Suns 2012 NBA Champs
