3.8 Built engine/JWT TT error code p0014
05-25-2009, 12:45 AM
#1
Registered User
Thread Starter
iTrader: (5)
Join Date: Sep 2006
Location: UAE
Posts: 800
Likes: 0
Received 0 Likes
on
0 Posts
3.8 Built engine/JWT TT error code p0014
hi guys
on behalf of my friend who is about to give get 9mm gun and shot himself right on the head.
mods:
3.8Ltr GTM
cosworth heads.
JWT TT.
HKS F-CON
He is getting the following error code: p0014
can anybody suggest a solution.
thanks in advance
on behalf of my friend who is about to give get 9mm gun and shot himself right on the head.
mods:
3.8Ltr GTM
cosworth heads.
JWT TT.
HKS F-CON
He is getting the following error code: p0014
can anybody suggest a solution.
thanks in advance
Last edited by nightcrawler_8; 05-25-2009 at 04:49 AM.
05-25-2009, 04:32 AM
#2
I'm assuming this is a revup engine as P0014 is referring to the bank 1 exhaust cam timing control. Have a look over the wiring to ensure everything is plugged in first of all.
Possible causes (from the FSM):
Crankshaft position sensor (POS)
Camshaft position sensor (PHASE)
Exhaust valve timing control position sensor
Exhaust valve control magnet retarder
Accumulation of debris to the signal pick-up portion of the camshaft
Timing chain installation
Exhaust valve timing control pulley assembly
Possible causes (from the FSM):
Crankshaft position sensor (POS)
Camshaft position sensor (PHASE)
Exhaust valve timing control position sensor
Exhaust valve control magnet retarder
Accumulation of debris to the signal pick-up portion of the camshaft
Timing chain installation
Exhaust valve timing control pulley assembly
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM
