FS: 7175 TURBO, ID2000, VOR Bypass Valve, AEM WM GAUGE
#1
7175 TURBO, ID2000, VOR Bypass Valve, AEM WM GAUGE
I have a few things for sale. Everything is either just barely used (0 miles, but handled and idled in my car for less than 10 minutes). Reason for selling, is parting out turbo setup, already have vortech, smaller injectors, e85 and bigger BOV to replace these things.
ALL ITEM PRICES DO NOT INCLUDE PAY PAL FEES. UNFORTUNATELY IF YOU DON'T PAY THE FEES, I WON'T SHIP!!!!! You can send payment as a gift if you really don't want to pay them, but this is entirely up to you. Pay pal fee is 2.9% plus $0.30 USD per item. If you want to buy multiple things from me at once, please send me a pm and I'll give you a better price. Any questions feel free to PM. Thanks for taking a look!
First up is the Turbo. Spec is 7175 .96 a/r t4 housing with a 3 1/2" vband discharge and jet coating on the exhaust side for better heat containment. Idled on the car, no issues with the turbo. Is a bit dirty on the outside of the turbo. No in or out shaft play, small amount of shaft play up and down COMPLETELY NORMAL FOR A JOURNAL BEARING TURBO THAT HAS NO OIL IN IT, no wheel grinding or touching in either housing. $1000 shipped + pay pal
Next are my ID2000's. I used these for probably about 10 minutes on 91 octane gas. I removed them from the car because I won't see the power needed for them, and ID1000's are far cheaper. Rather trade down and put some money back in the pocket. I will ship them in my ID1000 box; they are completely plug and play for the 350z/G35/vq35, and I will include the ID card/vinyl as-well. Price is $1000 shipped + pay pal. My loss is your gain, these are the biggest and best injectors you could possibly get! These fit the HR and DE
Next I have my vortech Bypass Valve, brand new, in the box it came with, including instructions, screws and gasket. Never even put this thing on the car, it just came with my vortech TI kit (which it is too small for). 115$ Shipped + pay pal
Finally I'm selling my AEM Failsafe Watermeth gauge. I don't have the alternative silver bezels and backplate, so you're only going to get the 0-1000cc black gauge setup. This is the 1000cc model. It's essentially new, I don't have the instructions any longer, and it has one issue. The flow meter wire plug got ripped off the car sometime when I was having the car towed back from the shop. It has all the necessary wires otherwise. You should be able to get this replaced relatively cheaply from AEM. This missing plug is shown in this picture. This gauge has data logging capabilities and can setup several maps for the output voltage. If you want to run water meth you want one of these gauges. The retail is 250$+, due to the missing plug and gauge faces, I will price this at 130$ shipped + paypal. Here's a quick video demonstrating what it does if you aren't aware:
ALL ITEM PRICES DO NOT INCLUDE PAY PAL FEES. UNFORTUNATELY IF YOU DON'T PAY THE FEES, I WON'T SHIP!!!!! You can send payment as a gift if you really don't want to pay them, but this is entirely up to you. Pay pal fee is 2.9% plus $0.30 USD per item. If you want to buy multiple things from me at once, please send me a pm and I'll give you a better price. Any questions feel free to PM. Thanks for taking a look!
First up is the Turbo. Spec is 7175 .96 a/r t4 housing with a 3 1/2" vband discharge and jet coating on the exhaust side for better heat containment. Idled on the car, no issues with the turbo. Is a bit dirty on the outside of the turbo. No in or out shaft play, small amount of shaft play up and down COMPLETELY NORMAL FOR A JOURNAL BEARING TURBO THAT HAS NO OIL IN IT, no wheel grinding or touching in either housing. $1000 shipped + pay pal
Next are my ID2000's. I used these for probably about 10 minutes on 91 octane gas. I removed them from the car because I won't see the power needed for them, and ID1000's are far cheaper. Rather trade down and put some money back in the pocket. I will ship them in my ID1000 box; they are completely plug and play for the 350z/G35/vq35, and I will include the ID card/vinyl as-well. Price is $1000 shipped + pay pal. My loss is your gain, these are the biggest and best injectors you could possibly get! These fit the HR and DE
Next I have my vortech Bypass Valve, brand new, in the box it came with, including instructions, screws and gasket. Never even put this thing on the car, it just came with my vortech TI kit (which it is too small for). 115$ Shipped + pay pal
Finally I'm selling my AEM Failsafe Watermeth gauge. I don't have the alternative silver bezels and backplate, so you're only going to get the 0-1000cc black gauge setup. This is the 1000cc model. It's essentially new, I don't have the instructions any longer, and it has one issue. The flow meter wire plug got ripped off the car sometime when I was having the car towed back from the shop. It has all the necessary wires otherwise. You should be able to get this replaced relatively cheaply from AEM. This missing plug is shown in this picture. This gauge has data logging capabilities and can setup several maps for the output voltage. If you want to run water meth you want one of these gauges. The retail is 250$+, due to the missing plug and gauge faces, I will price this at 130$ shipped + paypal. Here's a quick video demonstrating what it does if you aren't aware:
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM