Stillen headers with ST powerlab kit
#1
Registered User
Thread Starter
Join Date: Apr 2015
Location: Chicago IL
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Stillen headers with ST powerlab kit
How well do stillen headers work with the st powerlab kit? I wasn't able to find anything about this on here ...
#4
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Well it looks like it uses factory manifolds , and those headers replace the manifolds.
They will work, but the question is how much improvement will you get
They will work, but the question is how much improvement will you get
#5
Registered User
Thread Starter
Join Date: Apr 2015
Location: Chicago IL
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
#6
Registered User
Thread Starter
Join Date: Apr 2015
Location: Chicago IL
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
That's what i picked up from what i've read on this forum but i'm yet to find someone who has this setup or knows if these headers would work better with the kit vs. stock manifold
Trending Topics
#8
Registered User
Thread Starter
Join Date: Apr 2015
Location: Chicago IL
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
The headers are already on the car but i'm itching to go back to stock manifolds because of how much they ruined my exhausts tone (i got motordyne). That's why i'm trying to see if it's actually worth it to have the headers with the turbo
#9
New Member
iTrader: (1)
So, one thing to keep in mind... all headers will technically fit but depending on the primary runners routing they can cause clearance issues with the downpipe, I installed DC headers on my car, had major issues getting them to clear the downpipe... had to do some serious "massaging" with a hammer. My buddy installed Megan headers without much issue, I think there was a little difficulty getting the crossover pipe back on though.
#10
Registered User
Thread Starter
Join Date: Apr 2015
Location: Chicago IL
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
So, one thing to keep in mind... all headers will technically fit but depending on the primary runners routing they can cause clearance issues with the downpipe, I installed DC headers on my car, had major issues getting them to clear the downpipe... had to do some serious "massaging" with a hammer. My buddy installed Megan headers without much issue, I think there was a little difficulty getting the crossover pipe back on though.
Thanks for your input btw!
#12
Registered User
Thread Starter
Join Date: Apr 2015
Location: Chicago IL
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts