Exhaust Questions
#62
Registered User
Thread Starter
http://intensepower.com/inrapi35g35.html
I think I will go with these. First I will have to convince my dad to let me buy them.
#63
New Member
Tune.
Breathing mods leave your car running lean. A CEL is merely putting a bandaid on the problem and it will come back to bite you in the *** later.
#64
Registered User
Thread Starter
Kakimoto
Tomei Expreme
Last edited by kakirk30; 08-20-2014 at 07:42 PM.
#65
New Member
#67
New Member
iTrader: (21)
I only chimed in because I have the Agency Power Single. I have a Y pipe of which I am not at liberty to discuss the name brand of because they have not been very professional in dealing with me, and SGM long tube headers.
ON the intake side I have a custom 3.5" intake into a NWP throttle body then into a gutted and enlarged stock plenum with a "no name brand" plenum spacer.
ON the intake side I have a custom 3.5" intake into a NWP throttle body then into a gutted and enlarged stock plenum with a "no name brand" plenum spacer.
#69
Registered User
Thread Starter
What if I did a custom 2.5" Dual Mandrel Bent Stainless Steel Exhaust. I would use two of the HKS Carbon- Ti mufflers. How much would I expect to pay. The mufflers shipped are $770. It would leave me with around $445 dollars for the shop to weld and install. Do you think that is possible? Or would it be more than $1200 all in all.
Thread
Thread Starter
Forum
Replies
Last Post
Justin100
Intake Exhaust
26
11-29-2015 03:58 PM